No Products in the Cart
Danfoss 151-6014 is the low speed high torque orbital (gerotor) hydraulic motor in the Danfoss OMR pattern, 160 cc per revolution, with a two bolt mounting flange, a keyed steel output shaft and side oil ports. It is used on machines and equipment using the Danfoss OMR 160 motor 151-6014. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Hydraulic Motor |
| Replaces | Danfoss 151-6014 |
| Series | Danfoss OMR pattern |
| Displacement | 160 cc per revolution (OMR 160) |
| Mounting | Two bolt mounting flange |
| Type | Orbital (gerotor) low speed high torque motor |
| Condition | New, aftermarket |
| Stat. HS-Code | 841229 |
| Country of Manufacture | China |
| Danfoss Part No.(SPM Part No.) |
|---|
| 151-6014(SPM-HEP-5091) |
| 1516014(SPM-HEP-5091) |
Wheel or drive loses power
A worn orbital motor leaks oil internally and slows down or stalls under load. If the pump delivers full flow and pressure, the motor is the next thing to check.
Oil leaking at the shaft
A failed shaft seal on an old motor usually means the bearings and gerotor are worn too. A complete new motor is often quicker than a rebuild.
Augers, sweepers and conveyors
Orbital motors drive augers, brooms, mixers, winches and conveyors. Keeping a spare of the same number avoids a long stop.
Matching the old unit
Match the full part number, flange, shaft and port type of the old motor. The number is on the label or stamped on the body.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay, aftermarket seller | USD 249.20 | 2 Nov 2026 |
| SINOCMP | USD 259.00 | 2 Nov 2026 |
| FridayParts | USD 261.03 | 2 Nov 2026 |
| Fab Heavy Parts | USD 277.76 | 2 Nov 2026 |
| Buy Machinery Parts | USD 310.80 | 2 Nov 2026 |
| Spare Part Mart | USD 191.99 | Today |
Our price of USD 191.99 is 23% to 38% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it is a direct replacement for the Danfoss 151-6014 with the same fitting.
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new hydraulic motor.
No. It is an aftermarket hydraulic motor made to replace the Danfoss 151-6014. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
