Delphi 9320A215G is the Delphi DP210 type rotary injection pump: alloy and dark cast body with the mounting flange, four delivery outlets, the advance unit and throttle lever with return spring, fuel shutoff solenoid with blue plug and a keyed drive shaft. It is used on Perkins 1104C-44T engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Delphi 9320A210G, 9323A350G and Perkins 2644H013.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Injection Pump |
| Replaces |
Delphi 9320A210G |
| Engine |
Perkins 1104C-44T |
| Pump type |
DP210 rotary pump |
| Cross references |
Delphi 9320A215G, 9323A350G, Perkins 2644H013 |
| Fits |
Perkins 1104C-44T engines with the Delphi DP210 rotary pump |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Machines
Perkins 1104C-44T engines with the Delphi DP210 rotary pump
Check the part number on your old unit before ordering.
Part numbers
| Delphi Part No.(SPM Part No.)
|
Fits |
|
9320A210G(SPM-HEP-5131)
|
Perkins 1104C-44T engines with the Delphi DP210 rotary pump |
|
9320A215G(SPM-HEP-5131)
|
Perkins 1104C-44T engines with the Delphi DP210 rotary pump |
|
9323A350G(SPM-HEP-5131)
|
Perkins 1104C-44T engines with the Delphi DP210 rotary pump |
|
2644H013(SPM-HEP-5131)
|
Perkins 1104C-44T engines with the Delphi DP210 rotary pump |
Applications & use cases
Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.
Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.
Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.
Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 986.35 |
2 Nov 2026 |
| VEP Diesel |
USD 1,119.00 |
2 Nov 2026 |
| YEM Parts |
USD 1,331.00 |
2 Nov 2026 |
| Fab Heavy Parts |
USD 1,373.12 |
2 Nov 2026 |
| Spare Part Mart |
USD 684.64 |
Today |
Our price of USD 684.64 is 31% to 50% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Delphi 9320A215G?
Yes, it is a direct replacement for the Delphi 9320A215G with the same fitting.
How often should I replace the Delphi 9320A215G?
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the fuel injection pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new fuel injection pump.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
Is this a genuine Delphi 9320A215G?
No. It is an aftermarket fuel injection pump made to replace the Delphi 9320A215G. It is not made by the original manufacturer; the number only shows what it replaces.