Denso 095000-5240 is the Denso type electronic common rail injector with a top two stud terminal, a long slim body with black centre sections and O ring grooves, and a slim nozzle. It is used on John Deere 6081 8.1L engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as John Deere RE524359.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-5240 |
| Injector type |
Electronic common rail |
| Engine |
John Deere 6081 8.1 litre |
| Cross references |
John Deere RE524359 |
| Fits |
the John Deere 6081 8.1 litre diesel engine in John Deere tractors |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the John Deere 6081 8.1 litre diesel engine in John Deere tractors
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-5240 / John Deere RE524359(SPM-HEP-4844)
|
the John Deere 6081 8.1 litre diesel engine in John Deere tractors |
Cross references
| Brand |
Part No. |
| Denso |
095000-5240 (this page, SPM-HEP-4844) |
| John Deere |
RE524359 |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the John Deere 6081 8.1 litre diesel engine in John Deere tractors.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| SINOCMP |
USD 189.00 |
1 Nov 2026 |
| Buy Machinery Parts |
USD 189.56 |
1 Nov 2026 |
| eBay (5 aftermarket sellers) |
USD 196.40 to 216.58 |
1 Nov 2026 |
| Spare Part Mart |
USD 151.20 |
Today |
Our price of USD 151.20 is 20% to 30% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Denso 095000-5240?
Yes, it is a direct replacement for the Denso 095000-5240 with the same fitting.
How often should I replace the Denso 095000-5240?
Often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
What should I do before fitting it?
Clean the bore and seat of carbon, and keep the nozzle capped until it goes in. Torque the clamp to the engine manual, not by feel.
Do I need new sealing washers?
Always. Fit a new copper washer and O-rings under every injector you remove. A reused washer leaks combustion gas and carbon packs the bore.
Is this a genuine Denso 095000-5240?
No. It is an aftermarket fuel injector made to replace the Denso 095000-5240. It is not made by the original manufacturer; the number only shows what it replaces.