No Products in the Cart
Denso 095000-5970 is the Denso type electronic common rail injector with a two pin connector on a short lead, a side fuel inlet and a clamp mounting body. It is used on Hino E13C engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Common Rail Fuel Injector |
| Replaces | Denso 095000-5970 |
| Injector type | Electronic common rail |
| Engine | Hino E13C |
| Condition | New, aftermarket |
| Stat. HS-Code | 840999 |
| Country of Manufacture | China |
| Denso Part No.(SPM Part No.) |
|---|
| 095000-5970(SPM-HEP-4800) |
| 0950005970(SPM-HEP-4800) |
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Hino E13C.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (6 aftermarket sellers) | USD 155.00 to 229.76 | 1 Nov 2026 |
| SINOCMP | USD 199.00 | 1 Nov 2026 |
| FridayParts | USD 216.18 | 1 Nov 2026 |
| Fab Heavy Parts | USD 216.72 | 1 Nov 2026 |
| Spare Part Mart | USD 124.00 | Today |
Our price of USD 124.00 is 20% to 46% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Hino E13C. Check the old fuel injector is marked 095000-5970 or one of the cross references, because makers change parts between serial ranges.
On the Hino E13C, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
Always. Fit a new copper washer and O-rings under every injector you remove. A reused washer leaks combustion gas and carbon packs the bore.
Not always. If the others pass a return leak or balance test, one can be changed. Where they are all high hours, a full set keeps the cylinders even.
No. It is an aftermarket fuel injector made to replace the Denso 095000-5970. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
