Denso 095000-6502 is the Denso type electronic common rail injector with a top two stud terminal, a long slim body with black centre sections and O ring grooves, and a slim nozzle. It is used on John Deere 4045 and 6068 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as John Deere RE529414.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-6502 |
| Injector type |
Electronic common rail |
| Engine |
John Deere 4045 4.5 litre, 6068 6.8 litre |
| Machine |
John Deere 310K |
| Cross references |
John Deere RE529414 |
| Fits |
the John Deere 4045 4.5 litre and 6068 6.8 litre diesel engines, including the 310K backhoe loader |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the John Deere 4045 4.5 litre and 6068 6.8 litre diesel engines, including the 310K backhoe loader
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-6502 / John Deere RE529414(SPM-HEP-4843)
|
the John Deere 4045 4.5 litre and 6068 6.8 litre diesel engines, including the 310K backhoe loader |
Cross references
| Brand |
Part No. |
| Denso |
095000-6502 (this page, SPM-HEP-4843) |
| John Deere |
RE529414 |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the John Deere 4045 4.5 litre, 6068 6.8 litre diesel engines and including the 310K backhoe loader. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (5 aftermarket sellers) |
USD 110.90 to 227.99 |
1 Nov 2026 |
| SINOCMP |
USD 219.00 |
1 Nov 2026 |
| Spare Part Mart |
USD 88.72 |
Today |
Our price of USD 88.72 is 20% to 61% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my John Deere 4045 4.5 litre?
Yes, it was made for the John Deere 4045 4.5 litre, and 2 more listed under compatible equipment. Check the old fuel injector is marked 095000-6502 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injector on my John Deere 4045 4.5 litre?
On the John Deere 4045 4.5 litre, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
Does it need coding to the engine?
Most common rail injectors carry a trim code (QR or IMA) printed on the body. Enter it with a diagnostic tool after fitting, or the engine runs rough and smokes.
Do I need new sealing washers?
Always. Fit a new copper washer and O-rings under every injector you remove. A reused washer leaks combustion gas and carbon packs the bore.
Is this a genuine Denso 095000-6502?
No. It is an aftermarket fuel injector made to replace the Denso 095000-6502. It is not made by the original manufacturer; the number only shows what it replaces.