Denso 095000-6800 is the Denso type electronic common rail injector with a single stud terminal and locating plate, a side fuel inlet and a slim nozzle body. It is used on Kubota V3800DI engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-6800 |
| Injector type |
Electronic common rail |
| Engine |
Kubota V3800DI |
| Fits |
the Kubota V3800DI diesel engine |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the Kubota V3800DI diesel engine
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-6800(SPM-HEP-4804)
|
the Kubota V3800DI diesel engine |
|
0950006800(SPM-HEP-4804)
|
the Kubota V3800DI diesel engine |
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Kubota V3800DI diesel engine.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (6 aftermarket sellers) |
USD 120.27 to 132.90 |
1 Nov 2026 |
| Buy Machinery Parts |
USD 297.60 |
1 Nov 2026 |
| SINOCMP |
USD 369.99 |
1 Nov 2026 |
| Fab Heavy Parts (pack of 4) |
USD 805.39 |
1 Nov 2026 |
| Spare Part Mart |
USD 95.61 |
Today |
Our price of USD 95.61 is 21% to 88% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Kubota V3800DI diesel engine?
Yes, it was made for the Kubota V3800DI diesel engine. Check the old fuel injector is marked 095000-6800 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injector on my Kubota V3800DI diesel engine?
On the Kubota V3800DI diesel engine, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
Do I need new sealing washers?
Always. Fit a new copper washer and O-rings under every injector you remove. A reused washer leaks combustion gas and carbon packs the bore.
What should I do before fitting it?
Clean the bore and seat of carbon, and keep the nozzle capped until it goes in. Torque the clamp to the engine manual, not by feel.
Is this a genuine Denso 095000-6800?
No. It is an aftermarket fuel injector made to replace the Denso 095000-6800. It is not made by the original manufacturer; the number only shows what it replaces.