Denso 095000-8871 is the Denso type electronic common rail injector with a side connector, a black cast body with a capped high pressure inlet and leak off fitting, and a long nozzle body. It is used on Sinotruk Howo trucks (MC11, MC13 engines). This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Sinotruk VG1038080007.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-8871 |
| Injector type |
Electronic common rail |
| Engine |
Sinotruk MC11, MC13 |
| Application |
Sinotruk Howo trucks |
| Cross references |
Sinotruk VG1038080007 |
| Fits |
the Sinotruk MC11 and MC13 diesel engines in Howo trucks |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the Sinotruk MC11 and MC13 diesel engines in Howo trucks
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-8871 / Sinotruk VG1038080007(SPM-HEP-4856)
|
the Sinotruk MC11 and MC13 diesel engines in Howo trucks |
Cross references
| Brand |
Part No. |
| Denso |
095000-8871 (this page, SPM-HEP-4856) |
| Sinotruk |
VG1038080007 |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Sinotruk MC11 and MC13 diesel engines in Howo trucks. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (6 aftermarket sellers) |
USD 120.65 to 170.87 |
1 Nov 2026 |
| SINOCMP |
USD 169.00 |
1 Nov 2026 |
| WDPART |
USD 177.00 |
4 Nov 2026 |
| Fab Heavy Parts |
USD 202.71 |
4 Nov 2026 |
| Buy Machinery Parts |
USD 217.19 |
4 Nov 2026 |
| YEM Parts |
USD 228.70 |
4 Nov 2026 |
| Spare Part Mart |
USD 101.95 |
Today |
Our price of USD 101.95 is 15% to 55% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Sinotruk MC11?
Yes, it was made for the Sinotruk MC11, and 1 more listed under compatible equipment. Check the old fuel injector is marked 095000-8871 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injector on my Sinotruk MC11?
On the Sinotruk MC11, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
How do I find the bad one?
Run a return leak test or read the injector balance rates with a diagnostic tool. On older mechanical engines, cracking each pipe in turn at idle shows which cylinder changes least.
Does it need coding to the engine?
Most common rail injectors carry a trim code (QR or IMA) printed on the body. Enter it with a diagnostic tool after fitting, or the engine runs rough and smokes.
Is this a genuine Denso 095000-8871?
No. It is an aftermarket fuel injector made to replace the Denso 095000-8871. It is not made by the original manufacturer; the number only shows what it replaces.