Denso 294050-0640 is the Denso HP4 type common rail supply pump: alloy body with the black pumping head, the suction control valve with its plug, bent steel feed pipes, fuel temperature sensor and a taper drive shaft with nut. It is used on Isuzu 6HK1 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Isuzu 8-98239521-0 and 8-98239521-1.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Injection Pump |
| Replaces |
Denso 294050-0640 |
| Engine |
Isuzu 6HK1 |
| Type |
Common rail supply pump (Denso HP4) |
| Cross references |
Isuzu 8-98239521-0, 8-98239521-1 |
| Fits |
Isuzu 6HK1 engines in excavators and trucks |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Machines
Isuzu 6HK1 engines in excavators and trucks
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
294050-0640(SPM-HEP-5141)
|
Isuzu 6HK1 engines in excavators and trucks |
|
8-98239521-0(SPM-HEP-5141)
|
Isuzu 6HK1 engines in excavators and trucks |
|
8-98239521-1(SPM-HEP-5141)
|
Isuzu 6HK1 engines in excavators and trucks |
Applications & use cases
Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.
Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.
Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.
Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 401.99 |
2 Nov 2026 |
| FridayParts |
USD 566.88 |
2 Nov 2026 |
| YEM Parts |
USD 728.21 |
2 Nov 2026 |
| Buy Machinery Parts |
USD 846.90 |
2 Nov 2026 |
| Spare Part Mart |
USD 319.36 |
Today |
Our price of USD 319.36 is 21% to 62% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Denso 294050-0640?
Yes, it is a direct replacement for the Denso 294050-0640 with the same fitting.
How often should I replace the Denso 294050-0640?
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the fuel injection pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new fuel injection pump.
Is this a genuine Denso 294050-0640?
No. It is an aftermarket fuel injection pump made to replace the Denso 294050-0640. It is not made by the original manufacturer; the number only shows what it replaces.