John Deere SE501932 is the Denso type electronic common rail injector with a top two stud terminal, a long slim stainless body with a black centre section and a slim nozzle. It is used on John Deere 6068 6.8L engines (6020 and 7020 series tractors). This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as John Deere RE520241, RE520334 and 095000-5490.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-5490 |
| Injector type |
Electronic common rail |
| Engine |
John Deere 6068 6.8 litre |
| Machine |
John Deere 6520, 6620, 7220, 7320, 7420, 7520 |
| Cross references |
John Deere RE520241, RE520334, SE501932 |
| Fits |
the John Deere 6068 6.8 litre diesel engine in 6520, 6620, 7220, 7320, 7420 and 7520 tractors |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the John Deere 6068 6.8 litre diesel engine in 6520, 6620, 7220, 7320, 7420 and 7520 tractors
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-5490 / John Deere RE520241 / John Deere RE520334 / John Deere SE501932(SPM-HEP-4838)
|
the John Deere 6068 6.8 litre diesel engine in 6520, 6620, 7220, 7320, 7420 and 7520 tractors |
Cross references
| Brand |
Part No. |
| Denso |
095000-5490
|
| John Deere |
RE520241 |
| Denso |
RE520334 |
| Denso |
SE501932 (this page, SPM-HEP-4838) |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the John Deere 6068 6.8 litre diesel engine in 6520, 6620, 7220, 7320 and 2 more. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (5 aftermarket sellers) |
USD 165.99 to 188.90 |
1 Nov 2026 |
| SINOCMP |
USD 249.00 |
1 Nov 2026 |
| Spare Part Mart |
USD 132.79 |
Today |
Our price of USD 132.79 is 20% to 47% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my John Deere SE501932?
Yes, it is a direct replacement for the John Deere SE501932 with the same fitting.
How often should I replace the John Deere SE501932?
Often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
How do I find the bad one?
Run a return leak test or read the injector balance rates with a diagnostic tool. On older mechanical engines, cracking each pipe in turn at idle shows which cylinder changes least.
What should I do before fitting it?
Clean the bore and seat of carbon, and keep the nozzle capped until it goes in. Torque the clamp to the engine manual, not by feel.
Is this a genuine John Deere SE501932?
No. It is an aftermarket fuel injector made to replace the John Deere SE501932. It is not made by the original manufacturer; the number only shows what it replaces.