Deutz 01176452 is the hydraulic gear pump in an aluminium body with black cast end covers, a tapered drive shaft with nut and four bolt ports on each side. It is used on Deutz 06 and 07 series tractors. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Hydraulic Gear Pump |
| Replaces |
Deutz 01176452 |
| Machine |
Deutz 4007, 4807, 5207, 6006, 6007, 6206, 6207, 6806, 7006, 7206, 8006, 10006, 13006 tractors |
| Drive |
Tapered shaft with nut |
| Fits |
Deutz 4007, 4807, 5207, 6006, 6007, 6206, 6207, 6806, 7006, 7206, 8006, 10006 and 13006 tractors |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841360 |
| Country of Manufacture |
China |
Compatibility
Deutz machines
Deutz 4007, 4807, 5207, 6006, 6007, 6206, 6207, 6806, 7006, 7206, 8006, 10006 and 13006 tractors
Check the part number on your old unit before ordering.
Part numbers
| Deutz Part No.(SPM Part No.)
|
Fits |
|
01176452(SPM-HEP-5079)
|
Deutz 4007, 4807, 5207, 6006, 6007, 6206, 6207, 6806, 7006, 7206, 8006, 10006 and 13006 tractors |
Applications & use cases
Slow or weak hydraulics
A worn pump loses flow and pressure: functions slow down, especially when the oil is hot.
Noise
Whining or knocking from the pump points to worn gears or pistons, or cavitation from a blocked suction line.
Contamination
Metal in the filter or oil means the pump is wearing. Replace it before debris damages valves and motors.
Fitting tips
Flush the system, change the oil and filters, fill the pump case before starting, and run at low speed first.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| Kudu Parts |
USD 134.00 |
2 Nov 2026 |
| FridayParts |
USD 136.49 |
2 Nov 2026 |
| Buy Machinery Parts |
USD 167.99 |
2 Nov 2026 |
| SINOCMP |
USD 189.00 |
2 Nov 2026 |
| eBay, aftermarket seller |
USD 207.73 |
2 Nov 2026 |
| Spare Part Mart |
USD 112.00 |
Today |
Our price of USD 112.00 is 16% to 46% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Deutz 4007?
Yes, it was made for the Deutz 4007, and 12 more listed under compatible equipment. Check the old hydraulic pump is marked 01176452 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the hydraulic pump on my Deutz 4007?
On the Deutz 4007, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the hydraulic pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
Does the case drain need filling?
On piston pumps, yes. Fill the case through the drain port with clean hydraulic oil before the first start, or the bearings run dry.
Is this a genuine Deutz 01176452?
No. It is an aftermarket hydraulic pump made to replace the Deutz 01176452. It is not made by the original manufacturer; the number only shows what it replaces.