No Products in the Cart
Doosan 2523-9016 is the 24 volt engine stop (flameout) motor in a black housing with a push pull cable, mounting bracket and lead. It is used on Doosan DH220-5 and DH225-7 excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Engine Stop Motor 24V |
| Replaces | Doosan 2523-9016 |
| Voltage | 24 V |
| Machine | Doosan DH220-5, DH225-7 |
| Fits | Doosan (Daewoo) DH220-5 and DH225-7 excavators |
| Condition | New, aftermarket |
| Stat. HS-Code | 850590 |
| Country of Manufacture | China |
Doosan machines
Check the part number on your old unit before ordering.
| Doosan Part No.(SPM Part No.) | Fits |
|---|---|
| 2523-9016(SPM-HEP-4691) | Doosan (Daewoo) DH220-5 and DH225-7 excavators |
Engine will not start or will not stop
A failed fuel shutoff solenoid holds the fuel off (no start) or will not cut it (no stop). Check power at the plug first.
Engine cuts out
A weak pull-in or hold coil lets the solenoid drop out under vibration and the engine stalls.
Sticking plunger
Dirt and corrosion stop the plunger moving freely. Replacing the solenoid is quicker than freeing an old one.
Fleet spares
A spare solenoid on the van turns a no-start into a quick fix on site.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay, aftermarket seller | USD 45.58 | 31 Oct 2026 |
| FridayParts | USD 78.75 | 31 Oct 2026 |
| SINOCMP | USD 109.00 | 31 Oct 2026 |
| Spare Part Mart | USD 35.87 | Today |
Our price of USD 35.87 is 21% to 67% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Doosan (Daewoo) DH220-5, and 1 more listed under compatible equipment. Check the old solenoid is marked 2523-9016 or one of the cross references, because makers change parts between serial ranges.
On the Doosan (Daewoo) DH220-5, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Usually. Clear them after fitting and run the machine, so old codes are not mistaken for a new fault.
Read the fault codes, then check the plug and wiring for corrosion or a broken wire. A wiring fault reads the same as a failed solenoid.
No. It is an aftermarket solenoid made to replace the Doosan 2523-9016. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
