Doosan 301202-00067 is the 24 V power relay: the plated steel coil can marked 24V on a slotted mounting bracket, and the black terminal block with two large copper main studs and two small screw terminals for the coil. It is used on Doosan Daewoo excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Power Relay 24V |
| Replaces |
Doosan 301202-00067 |
| Type |
Power relay, 24 V DC |
| Terminals |
2 main studs, 2 coil screw terminals (short pin) |
| Machine |
Doosan Daewoo DX140W, DX160W-3, DX170W, DX300LC; Solar 185W-V, 255LC-V |
| Fits |
Doosan Daewoo DX140W, DX160W-3, DX170W and DX300LC excavators and Solar 185W-V and 255LC-V excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
853641 |
| Country of Manufacture |
China |
Compatibility
Doosan machines
Doosan Daewoo DX140W, DX160W-3, DX170W and DX300LC excavators and Solar 185W-V and 255LC-V excavators
Check the part number on your old unit before ordering.
Part numbers
| Doosan Part No.(SPM Part No.)
|
Fits |
|
301202-00067(SPM-HEP-5299)
|
Doosan Daewoo DX140W, DX160W-3, DX170W and DX300LC excavators and Solar 185W-V and 255LC-V excavators |
Applications & use cases
Function dead with good fuses
A starter, glow plug or fuel relay that has burned its contacts stops the circuit without blowing a fuse.
Clicking but no power
A relay that clicks but does not pass current has worn contacts and needs replacing.
Heat and vibration
Relays near the engine wear out from heat and vibration. Swap them during major services.
Fleet spares
Relays are cheap to keep on the van and quick to change on site.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 86.33 |
3 Nov 2026 |
| Diselmart |
USD 92.80 |
4 Nov 2026 |
| YEM Parts |
USD 129.49 |
4 Nov 2026 |
| Buy Machinery Parts |
USD 131.10 |
4 Nov 2026 |
| MyMROmarts |
USD 146.99 |
3 Nov 2026 |
| Spare Part Mart |
USD 66.66 |
Today |
Our price of USD 66.66 is 23% to 55% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Doosan Daewoo DX140W?
Yes, it was made for the Doosan Daewoo DX140W, and 5 more listed under compatible equipment. Check the old relay is marked 301202-00067 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the relay on my Doosan Daewoo DX140W?
On the Doosan Daewoo DX140W, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the relay needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
How do I test the old part first?
Read the fault codes, then check the plug and wiring for corrosion or a broken wire. A wiring fault reads the same as a failed relay.
Do the fault codes need clearing?
Usually. Clear them after fitting and run the machine, so old codes are not mistaken for a new fault.
Is this a genuine Doosan 301202-00067?
No. It is an aftermarket relay made to replace the Doosan 301202-00067. It is not made by the original manufacturer; the number only shows what it replaces.