Eaton 103-1011-012 is the low speed high torque orbital (gerotor) hydraulic motor in the Char-Lynn 103 series pattern, with a square four bolt mounting flange, a steel output shaft and side oil ports. It is used on machines and equipment using the Eaton Char-Lynn 103 series motor 103-1011-012. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Eaton 103-1011.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Hydraulic Motor |
| Replaces |
Eaton 103-1011-012 |
| Series |
Eaton Char-Lynn 103 series pattern |
| Mounting |
Square four bolt mounting flange |
| Type |
Orbital (gerotor) low speed high torque motor |
| Cross references |
Eaton 103-1011 |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841229 |
| Country of Manufacture |
China |
Part numbers
| Eaton Part No.(SPM Part No.)
|
|
103-1011-012(SPM-HEP-5086)
|
|
103-1011(SPM-HEP-5086)
|
Applications & use cases
Wheel or drive loses power
A worn orbital motor leaks oil internally and slows down or stalls under load. If the pump delivers full flow and pressure, the motor is the next thing to check.
Oil leaking at the shaft
A failed shaft seal on an old motor usually means the bearings and gerotor are worn too. A complete new motor is often quicker than a rebuild.
Augers, sweepers and conveyors
Orbital motors drive augers, brooms, mixers, winches and conveyors. Keeping a spare of the same number avoids a long stop.
Matching the old unit
Match the full part number, flange, shaft and port type of the old motor. The number is on the label or stamped on the body.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 210.00 |
2 Nov 2026 |
| Amazon (Nancy-Parts store) |
USD 237.00 |
2 Nov 2026 |
| SINOCMP |
USD 259.00 |
2 Nov 2026 |
| Amazon (FridayParts) |
USD 259.00 |
2 Nov 2026 |
| Fab Heavy Parts |
USD 284.48 |
2 Nov 2026 |
| Yem Parts |
USD 321.59 |
2 Nov 2026 |
| Buy Machinery Parts |
USD 402.00 |
2 Nov 2026 |
| Spare Part Mart |
USD 161.90 |
Today |
Our price of USD 161.90 is 23% to 60% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Eaton 103-1011-012?
Yes, it is a direct replacement for the Eaton 103-1011-012 with the same fitting.
How often should I replace the Eaton 103-1011-012?
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the hydraulic motor needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new hydraulic motor.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Is this a genuine Eaton 103-1011-012?
No. It is an aftermarket hydraulic motor made to replace the Eaton 103-1011-012. It is not made by the original manufacturer; the number only shows what it replaces.