Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Elmo Rietschle 526098 Aftermarket Carbon Vane Set, 527958, 5 Vanes 320 x 69 x 5 mm
Elmo Rietschle 526098 Aftermarket Carbon Vane Set, 527958, 5 Vanes 320 x 69 x 5 mm
Elmo Rietschle 526098 Aftermarket Carbon Vane Set, 527958, 5 Vanes 320 x 69 x 5 mm
  • SKU: SPM-VAN-2239-P5
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time

Elmo Rietschle 526098 Aftermarket Carbon Vane Set, 527958, 5 Vanes 320 x 69 x 5 mm

$159.99 USD

Aftermarket replacement carbon vane set for Elmo Rietschle VTB 250, DTB 250, VTB 251, VTB 180, DTB 180 dry running (oil free) rotary vane vacuum pumps and compressors. It replaces Elmo Rietschle part number 526098 (also listed as 527958, 526623): a set of 5 graphite carbon vanes, each 320 x 69 x 5 mm (length x height x thickness).

In a dry running Rietschle pump the carbon vanes are the main wear part. They slide in the rotor slots, are thrown out against the cylinder wall and wear a little on every turn. As they shorten the pump loses vacuum and flow, runs hotter and gets noisier, and a vane worn too far can break and damage the cylinder. Rietschle gives a minimum vane height in each pump's manual; change the full set before the vanes reach it.

Always change all 5 vanes together so the rotor stays balanced, and clean the carbon dust out of the pump and filters while it is open. The vanes are made from self lubricating graphite carbon to the Rietschle size and come as a complete set for one pump.

Technical Properties & Sizes

Specifications
Part Type Carbon vane set (rotary vanes)
Replaces Elmo Rietschle 526098 / 527958 / 526623
Vanes in Set 5
Vane Size (L x H x T) 320 x 69 x 5 mm
Material Self lubricating graphite carbon
Fits Elmo Rietschle VTB 250, DTB 250, VTB 251, VTB 180, DTB 180
Pump Type Dry running rotary vane vacuum pump / compressor
Stat. HS-Code 841490
Compatibility

Elmo Rietschle pumps

Elmo Rietschle VTB 250Elmo Rietschle DTB 250Elmo Rietschle VTB 251Elmo Rietschle VTB 180Elmo Rietschle DTB 180

Check the pump model plate and measure an old vane: 320 x 69 x 5 mm.

Find Your Size by Part Number
Pack Dimensions Elmo Rietschle Part No.(SPM Part No.) Fits
Set of 5 320 x 69 x 5 mm 526098 / 527958 / 526623(SPM-VAN-2239) Elmo Rietschle VTB 250, Elmo Rietschle DTB 250, Elmo Rietschle VTB 251, Elmo Rietschle VTB 180, Elmo Rietschle DTB 180

Applications & Use Cases

Planned vane changes
Measure the vane height at every service and change the set before it reaches Rietschle's minimum for your pump. Keeping a spare set means the change happens at the service, not after a breakdown.

Falling vacuum or flow
If the pump takes longer to pull down, holds a weaker vacuum, or sheets and parts start slipping, worn vanes are the usual cause once the filters are clean.

Noisy or hot running
Short or chipped vanes chatter in the slots and the pump runs hotter. Stop and check the vanes before one breaks.

Typical machines
Rietschle dry running vane pumps run CNC router hold down tables, printing and paper handling machines, packaging machines and pneumatic conveying.

Price Comparison

Aftermarket Prices for the Same Set
Seller Price Checked
eBay, aftermarket set USD 199.99 checked 4 Oct 2026
eBay, aftermarket set USD 212.48 checked 4 Oct 2026
Spare Part Mart USD 159.99 this page

Our price is 20% to 25% less than the aftermarket sets listed above. Prices are for the complete set of 5 vanes in US dollars, as listed on the date shown.

Price Beat Guarantee

Found this part cheaper elsewhere? Send us the listing and we will beat it under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently Asked Questions

Is this a genuine Elmo Rietschle 526098 set?

No. It is an aftermarket set made to the size of the Elmo Rietschle 526098 vanes. It is not made by or affiliated with Elmo Rietschle; the Rietschle numbers are used only to show what it replaces.

Will it fit my pump?

Yes if your pump is a Elmo Rietschle VTB 250, DTB 250, VTB 251, VTB 180, DTB 180 and the old vanes measure 320 x 69 x 5 mm. Check the model plate on the pump and measure an old vane before ordering.

Why 5 vanes?

The rotor in these pumps has 5 slots. Change every vane at the same time; mixing new and worn vanes unbalances the rotor and wears the new vanes fast.

When should I change the vanes?

When the vanes are worn down to the minimum height in your pump's manual, or sooner if a vane is chipped or cracked. Measure them at every filter service.

Do I need anything else?

Clean the carbon dust from the pump housing, rotor slots and filters, and change the inlet and outlet filters if they are loaded. Fit the vanes the same way round as the old ones, with the bevelled edge against the cylinder wall.

Do you ship to my country?

Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

RELATED PRODUCTS

BACK TO TOP