No Products in the Cart
Aftermarket replacement joystick controller for Genie S series telescopic boom lifts. It replaces Genie part number 40613 / 40613GT / 40613GN: the platform control joystick for the boom and drive functions.
Fits Genie S-40, Genie S-45, Genie S-60, Genie S-65, Genie S-80, Genie S-85. It is built to the same mounting, wiring and connector layout as the part it replaces, so it fits in place of the old one without changes to the machine.
Check the part number on the label of the old unit, or in the parts manual for your machine's serial number range, before ordering. Sold as a single unit, shipped worldwide.
| Part Type | Joystick Controller |
| Replaces | Genie 40613 / 40613GT / 40613GN |
| Type | Joystick controller with rubber boot and knob grip |
| Genie Numbers | 40613, 40613GT, 40613GN |
| Fits | Genie S-40, Genie S-45, Genie S-60, Genie S-65, Genie S-80, Genie S-85 |
| Condition | New, aftermarket |
| Stat. HS-Code | 853710 |
Genie machines
Check the part number on your old unit before ordering.
| Pack | Genie Part No.(SPM Part No.) | Fits |
|---|---|---|
| 1 Piece | 40613 / 40613GT / 40613GN(SPM-ALP-2211) | Genie S-40, Genie S-45, Genie S-60, Genie S-65, Genie S-80, Genie S-85 |
Machine will not drive or lift
A worn joystick is a common cause when the platform controls stop responding or only work in one direction. Check the fault code on the control box first, then the joystick.
Jerky or uneven movement
Worn potentiometers and enable switches give jumpy proportional control. A new joystick restores smooth starts and stops.
Broken handle or boot
A cracked handle or torn boot lets dirt and water into the joystick and it fails soon after. Replace it before it strands a machine.
Rental fleet spares
Keeping a spare joystick for each machine type means a lift goes back on hire the same day instead of waiting for parts.
What other sellers charge for this part (checked 3 Oct 2026):
Our price of USD 111.28 is 20% to 71% less than these sellers.
Found this part cheaper elsewhere? Send us the listing and we will beat it under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Genie 40613 / 40613GT / 40613GN. It is not made by or affiliated with Genie; the Genie part number is used only to show what it replaces.
It fits Genie S-40, Genie S-45, Genie S-60, Genie S-65, Genie S-80, Genie S-85. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It uses the same mounting and connector as the original. Disconnect the power before fitting and check the controls work in every direction before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
