Hino 23670-E0151 is the Denso type electronic common rail injector with a brown connector, a black cast body with a threaded side inlet and a leak off port, and a slim nozzle body. It is used on Hino N04C engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Denso 095000-5333.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-5333 |
| Injector type |
Electronic common rail |
| Engine |
Hino N04C |
| Application |
Hino 300 (Dutro), Toyota Dyna 200 |
| Cross references |
Hino 23670-E0151 |
| Fits |
the Hino N04C diesel engine in Hino 300 (Dutro) and Toyota Dyna 200 trucks |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the Hino N04C diesel engine in Hino 300 (Dutro) and Toyota Dyna 200 trucks
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-5333 / Hino 23670-E0151(SPM-HEP-4829)
|
the Hino N04C diesel engine in Hino 300 (Dutro) and Toyota Dyna 200 trucks |
Cross references
| Brand |
Part No. |
| Denso |
095000-5333
|
| Hino |
23670-E0151 (this page, SPM-HEP-4829) |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Hino N04C diesel engine in Hino 300 (Dutro) and Toyota Dyna 200 trucks. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (5 aftermarket sellers) |
USD 182.02 to 224.99 |
1 Nov 2026 |
| SINOCMP |
USD 259.00 |
1 Nov 2026 |
| Spare Part Mart |
USD 145.62 |
Today |
Our price of USD 145.62 is 20% to 44% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Hino 23670-E0151?
Yes, it is a direct replacement for the Hino 23670-E0151 with the same fitting.
How often should I replace the Hino 23670-E0151?
Often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
Should I replace all of them at once?
Not always. If the others pass a return leak or balance test, one can be changed. Where they are all high hours, a full set keeps the cylinders even.
How do I find the bad one?
Run a return leak test or read the injector balance rates with a diagnostic tool. On older mechanical engines, cracking each pipe in turn at idle shows which cylinder changes least.
Is this a genuine Hino 23670-E0151?
No. It is an aftermarket fuel injector made to replace the Hino 23670-E0151. It is not made by the original manufacturer; the number only shows what it replaces.