Hino 23670-E0280 is the Denso type electronic common rail injector with a grey connector on a short pigtail lead, a banjo bolt leak off fitting, a threaded side inlet and a slim nozzle body. It is used on Hino S05C and S05D engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Denso 095000-5400.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-5400 |
| Injector type |
Electronic common rail |
| Engine |
Hino S05C 4.6 litre, S05D 4.8 litre |
| Cross references |
Hino 23670-E0280 |
| Fits |
the Hino S05C 4.6 litre and S05D 4.8 litre diesel engines |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the Hino S05C 4.6 litre and S05D 4.8 litre diesel engines
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-5400 / Hino 23670-E0280(SPM-HEP-4833)
|
the Hino S05C 4.6 litre and S05D 4.8 litre diesel engines |
Cross references
| Brand |
Part No. |
| Denso |
095000-5400
|
| Hino |
23670-E0280 (this page, SPM-HEP-4833) |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Hino S05C 4.6 litre and S05D 4.8 litre diesel engines. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (5 aftermarket sellers) |
USD 119.99 |
1 Nov 2026 |
| SINOCMP |
USD 169.00 |
1 Nov 2026 |
| Fab Heavy Parts |
USD 308.45 |
1 Nov 2026 |
| Spare Part Mart |
USD 95.99 |
Today |
Our price of USD 95.99 is 20% to 69% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Hino S05C 4.6 litre?
Yes, it was made for the Hino S05C 4.6 litre, and 1 more listed under compatible equipment. Check the old fuel injector is marked 23670-E0280 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injector on my Hino S05C 4.6 litre?
On the Hino S05C 4.6 litre, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
How do I find the bad one?
Run a return leak test or read the injector balance rates with a diagnostic tool. On older mechanical engines, cracking each pipe in turn at idle shows which cylinder changes least.
Should I replace all of them at once?
Not always. If the others pass a return leak or balance test, one can be changed. Where they are all high hours, a full set keeps the cylinders even.
Is this a genuine Hino 23670-E0280?
No. It is an aftermarket fuel injector made to replace the Hino 23670-E0280. It is not made by the original manufacturer; the number only shows what it replaces.