No Products in the Cart
Hitachi 4436271 is the hydraulic pump high pressure sensor (type KM11, integral 3 pin connector). It is used on Hitachi EX and Zaxis excavators (also John Deere excavators). This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | High Pressure Sensor |
| Replaces | Hitachi 4436271 |
| Type | Hydraulic high pressure sensor, type KM11, integral connector |
| Connector | 3 pin |
| Fits | Hitachi EX200-2; Hitachi EX200-3; Hitachi ZX200LC; Hitachi ZX210; Hitachi ZX230LC; Hitachi ZX240-3; Hitachi ZX270; Hitachi ZX330; Hitachi ZX330-3 |
| Condition | New, aftermarket |
| Stat. HS-Code | 903289 |
Hitachi machines
Check the part number on your old unit before ordering.
| Hitachi Part No.(SPM Part No.) | Fits |
|---|---|
| 4436271(SPM-HEP-3026) | Hitachi EX200-2, Hitachi EX200-3, Hitachi ZX200LC, Hitachi ZX210, Hitachi ZX230LC, Hitachi ZX240-3, Hitachi ZX270, Hitachi ZX330, Hitachi ZX330-3 |
Warning light or fault code
A failed pressure sensor gives a false low or high reading, a warning on the monitor or a fault code. Check the plug and wiring first, then swap the sensor.
Slow or weak hydraulics
The controller uses the pump pressure signal to manage pump output and engine load. A sensor that reads wrong can leave the machine slow, weak or stalling under load.
Corroded or damaged plug
Sensors on the pump and valve block take water, oil and pressure washing. A corroded connector or cracked body is a reason to replace it.
Fitting tips
Relieve the hydraulic pressure before removing the old sensor, fit a new O ring lightly oiled, tighten to the machine maker's torque and check for leaks.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (12 aftermarket sellers) | USD 24.00 | 6 Oct 2026 |
| WDPart | USD 25.00 | 6 Oct 2026 |
| SINOCMP | USD 41.00 | 6 Oct 2026 |
| Holdwell | USD 56.00 | 6 Oct 2026 |
| MyMROmarts | USD 73.91 | 6 Oct 2026 |
| Spare Part Mart | USD 19.20 | Today |
Our price of USD 19.20 is 20% to 74% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Hitachi 4436271. It is not made by or affiliated with Hitachi; the Hitachi part number is used only to show what it replaces.
It fits Hitachi EX200-2; Hitachi EX200-3; Hitachi ZX200LC; Hitachi ZX210; Hitachi ZX230LC; Hitachi ZX240-3; Hitachi ZX270; Hitachi ZX330; Hitachi ZX330-3. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
