No Products in the Cart
Hypertherm 020607 is the 200A swirl ring used on the MAX200 machine torch. This is an aftermarket swirl ring made to the same part number and fit, for air plasma cutting.
The swirl ring sits between the electrode and the nozzle, insulates them from each other and spins the gas around the arc.
Check the number on your old part or in the torch manual before ordering: it should read 020607. Sold in packs of 2.
| Pack Size | 2 pieces per pack |
| Part number | 020607 |
| Part | Plasma swirl ring |
| Rating | 200A |
| Fits | MAX200 (Hypertherm) |
| Material | Heat resistant insulating material |
| Type | Aftermarket replacement |
| Stat. HS-Code | 851590 |
| Country of Manufacture | China |
| Trademarks | Hypertherm and MAX200 are trademarks of their owners. Names and part numbers are for reference only; this is an aftermarket part, not made or approved by them. |
Hypertherm MAX200
Match the part number on your old part before ordering.
| Dimensions | Hypertherm Part No.(SPM Part No.) |
|---|---|
| 200A | 020607(SPM-PLA-4933) |
Gas flow
The swirl ring spins the plasma gas around the electrode and centres the parts. Replace it when it is cracked, chipped, burned or its holes are blocked; a bad swirl ring shortens electrode and nozzle life.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (5 aftermarket sellers) (pack of 2) | USD 18.56 to 20.00 | 1 Nov 2026 |
| Weldcut (Poland) (pack of 2) | USD 34.71 | 1 Nov 2026 |
| Arc-Zone (2 singles) | USD 65.76 | 1 Nov 2026 |
| Spare Part Mart (pack of 2) | USD 14.74 | Today |
Our price of USD 14.74 is 21% to 78% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Hypertherm MAX200 (Hypertherm). Check the old plasma swirl ring is marked 020607 or one of the cross references, because makers change parts between serial ranges.
On the Hypertherm MAX200 (Hypertherm), it depends on hours and working conditions. Follow the machine service schedule, and change it when it shows wear rather than waiting for it to fail.
Leaks, noise, loss of performance, or visible wear compared with a new part. If in doubt, measure it against the sizes in the specifications.
Keep it until the new one is fitted and running. It is the quickest way to compare sizes, connectors and mounting if anything looks different.
Match the part number on the old plasma swirl ring to Hypertherm 020607 or a number in the cross reference table. If the number is worn off, compare the sizes in the specifications.
No. It is an aftermarket plasma swirl ring made to replace the Hypertherm 020607. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
