Isuzu 8-97069387-0 is the engine coolant pump: a cast aluminium body with a long inlet tube, an angled outlet neck and a four hole pulley hub. It is used on Isuzu 3KB1, 3KR1 and 3KC1 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Water Pump |
| Replaces |
Isuzu 8-97069387-0 |
| Engine |
Isuzu 3KB1, 3KR1, 3KC1 |
| Pulley hub |
4 hole |
| Fits |
Isuzu 3KB1, 3KR1 and 3KC1 engines, including the 3KC1 in Hitachi EX12 and EX30 mini excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Isuzu machines
Isuzu 3KB1, 3KR1 and 3KC1 engines, including the 3KC1 in Hitachi EX12 and EX30 mini excavators
Check the part number on your old unit before ordering.
Part numbers
| Isuzu Part No.(SPM Part No.)
|
Fits |
|
8-97069387-0(SPM-HEP-4658)
|
Isuzu 3KB1, 3KR1 and 3KC1 engines, including the 3KC1 in Hitachi EX12 and EX30 mini excavators |
|
8970693870(SPM-HEP-4658)
|
Isuzu 3KB1, 3KR1 and 3KC1 engines, including the 3KC1 in Hitachi EX12 and EX30 mini excavators |
Use cases and applications
What it does
It circulates coolant through the block, head and radiator. A worn seal or bearing lets coolant out and the engine overheat.
Where it is used
Made for the Isuzu 3KB1, 3KR1, 3KC1 engines, including the 3KC1 in Hitachi EX12 and 1 more. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| Amazon (Fikowjs) |
USD 255.00 |
3 Nov 2026 |
| Amazon (DJCXYSM) |
USD 265.00 |
3 Nov 2026 |
| Yem Parts |
USD 484.75 |
31 Oct 2026 |
| eBay, aftermarket seller |
USD 497.49 |
31 Oct 2026 |
| SINOCMP |
USD 499.00 |
31 Oct 2026 |
| Spare Part Mart |
USD 247.20 |
Today |
Our price of USD 247.20 is 3% to 50% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Isuzu 3KB1?
Yes, it was made for the Isuzu 3KB1, and 4 more listed under compatible equipment. Check the old water pump is marked 8-97069387-0 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the water pump on my Isuzu 3KB1?
On the Isuzu 3KB1, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the water pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Should I change the coolant and thermostat too?
If the coolant is old or dirty, yes. Worn coolant is the usual cause of seal failure, and a new pump in old coolant fails the same way.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new water pump.
Is this a genuine Isuzu 8-97069387-0?
No. It is an aftermarket water pump made to replace the Isuzu 8-97069387-0. It is not made by the original manufacturer; the number only shows what it replaces.