No Products in the Cart
Aftermarket replacement joystick controller for JLG E2 and E3 series electric scissor lifts. It replaces JLG part number 1600282: the single axis platform joystick that drives and steers the machine and raises and lowers the platform.
Fits JLG 1532E2, JLG 1532E3, JLG 1932E2, JLG 1932E3, JLG 2032E2, JLG 2033E3, JLG 2632E2, JLG 2646E2, JLG 3246E2. It is built to the same mounting, wiring and connector layout as the part it replaces, so it fits in place of the old one without changes to the machine.
Check the part number on the label of the old unit, or in the parts manual for your machine's serial number range, before ordering. Sold as a single unit, shipped worldwide.
| Part Type | Joystick Controller |
| Replaces | JLG 1600282 |
| Type | Single axis joystick controller with enable trigger and thumb rocker |
| Handle | Black grip with red enable lever |
| Fits | JLG 1532E2, JLG 1532E3, JLG 1932E2, JLG 1932E3, JLG 2032E2, JLG 2033E3, JLG 2632E2, JLG 2646E2, JLG 3246E2 |
| Condition | New, aftermarket |
| Stat. HS-Code | 853710 |
JLG machines
Check the part number on your old unit before ordering.
| Pack | JLG Part No.(SPM Part No.) | Fits |
|---|---|---|
| 1 Piece | 1600282(SPM-ALP-2210) | JLG 1532E2, JLG 1532E3, JLG 1932E2, JLG 1932E3, JLG 2032E2, JLG 2033E3, JLG 2632E2, JLG 2646E2, JLG 3246E2 |
Machine will not drive or lift
A worn joystick is a common cause when the platform controls stop responding or only work in one direction. Check the fault code on the control box first, then the joystick.
Jerky or uneven movement
Worn potentiometers and enable switches give jumpy proportional control. A new joystick restores smooth starts and stops.
Broken handle or boot
A cracked handle or torn boot lets dirt and water into the joystick and it fails soon after. Replace it before it strands a machine.
Rental fleet spares
Keeping a spare joystick for each machine type means a lift goes back on hire the same day instead of waiting for parts.
What other sellers charge for this part (checked 3 Oct 2026):
Our price of USD 79.73 is 20% to 38% less than these sellers.
Found this part cheaper elsewhere? Send us the listing and we will beat it under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of JLG 1600282. It is not made by or affiliated with JLG; the JLG part number is used only to show what it replaces.
It fits JLG 1532E2, JLG 1532E3, JLG 1932E2, JLG 1932E3, JLG 2032E2, JLG 2033E3, JLG 2632E2, JLG 2646E2, JLG 3246E2. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It uses the same mounting and connector as the original. Disconnect the power before fitting and check the controls work in every direction before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
