No Products in the Cart
Aftermarket replacement changeover contactor for JLG 48 volt electric lifts. It replaces JLG part number 7013301: the 48 volt 200 amp changeover contactor (SW181B type) that switches the drive circuit.
Fits JLG electric scissor lifts with 48V drive systems. It is built to the same mounting, wiring and connector layout as the part it replaces, so it fits in place of the old one without changes to the machine.
Check the part number on the label of the old unit, or in the parts manual for your machine's serial number range, before ordering. Sold as a single unit, shipped worldwide.
| Part Type | Changeover Contactor |
| Replaces | JLG 7013301 |
| Rating | 48 V coil, 200 A |
| Type | SW181B style changeover contactor |
| Fits | JLG electric scissor lifts with 48V drive systems |
| Condition | New, aftermarket |
| Stat. HS-Code | 853649 |
JLG machines
Check the part number on your old unit before ordering.
| Pack | JLG Part No.(SPM Part No.) | Fits |
|---|---|---|
| 1 Piece | 7013301(SPM-ALP-2258) | JLG electric scissor lifts with 48V drive systems |
Machine will not drive
The main or direction contactor switches the drive motor current. Burned or welded contacts stop the machine driving or let it drive one way only.
Clicking but no movement
A contactor that clicks without passing current has worn contacts. Replace it before the coil or the controller is damaged.
Battery and motor service
Swap the contactor when fitting new batteries or a new drive motor so a worn part does not undo the repair.
Fleet spares
Contactors are a common failure on electric scissors. Keep one per machine type in the workshop.
What other sellers charge for this part (checked 4 Oct 2026):
Our price of USD 64.00 is 20% to 42% less than these sellers.
Found this part cheaper elsewhere? Send us the listing and we will beat it under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of JLG 7013301. It is not made by or affiliated with JLG; the JLG part number is used only to show what it replaces.
It fits JLG electric scissor lifts with 48V drive systems. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It uses the same mounting and connector as the original. Disconnect the power before fitting and check the controls work in every direction before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
