No Products in the Cart
John Deere RE60622 is the crankshaft driven engine oil pump with cast body and mounting bracket, supplied with its O-ring. It is used on John Deere 6466 and 6076 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as John Deere AR96190, John Deere AR99339, John Deere AR99341 and John Deere RE44118.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Oil Pump |
| Replaces | John Deere RE60622 |
| Cross references | John Deere AR96190, John Deere AR99339, John Deere AR99341, John Deere RE44118 |
| Fits | John Deere 6466, 6076 and 6081 engines in 4050 to 4960 and 7710 to 8410 series tractors, 644 and 744 loaders, 370C, 450LC and 690C excavators and 9510 and 9550 combines |
| Condition | New, aftermarket |
| Stat. HS-Code | 841330 |
| Country of Manufacture | China |
John Deere machines
Check the part number on your old unit before ordering.
| John Deere Part No.(SPM Part No.) | Fits |
|---|---|
| RE60622 / AR96190 / AR99339 / AR99341 / RE44118(SPM-HEP-4480) | John Deere 6466, 6076 and 6081 engines in 4050 to 4960 and 7710 to 8410 series tractors, 644 and 744 loaders, 370C, 450LC and 690C excavators and 9510 and 9550 combines |
| Brand | Part No. |
|---|---|
| John Deere | RE60622 (this page, SPM-HEP-4480) |
| John Deere | AR96190 |
| John Deere | AR99339 |
| John Deere | AR99341 |
| John Deere | RE44118 |
All of these numbers are the same part.
Low oil pressure
A warning light or low gauge reading with the right oil level and a good sender often means a worn oil pump.
Engine rebuilds
Fit a new oil pump whenever the engine is rebuilt or the bearings are changed. Worn gears undo a fresh rebuild.
Noise from the bottom end
Rattles at start-up while the pressure builds are a sign the pump is not priming quickly enough.
Fitting tips
Prime the pump with clean oil, fit new gaskets and O rings, and check the pickup screen before closing up.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| TractorPartsASAP | USD 204.99 | 29 Oct 2026 |
| eBay (7 aftermarket sellers) | USD 206.53 to 326.00 | 29 Oct 2026 |
| Brander Landtechnik | USD 313.26 | 29 Oct 2026 |
| FridayParts | USD 319.68 | 29 Oct 2026 |
| G&T Engine Parts | USD 365.74 | 29 Oct 2026 |
| Quality Farm Supply (Maxiforce) | USD 387.99 | 29 Oct 2026 |
| Spare Part Mart | USD 165.02 | Today |
Our price of USD 165.02 is 19% to 57% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the John Deere 6466, and 10 more listed under compatible equipment. Check the old oil pump is marked RE60622 or one of the cross references, because makers change parts between serial ranges.
On the John Deere 6466, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
No. It is an aftermarket oil pump made to replace the John Deere RE60622. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
