No Products in the Cart
Kobelco 38553-61040 is the 24V hydraulic solenoid valve, type KWE6K-22/G24D16B (screw-in cartridge with SKM6 G24D coil). It is used on Kobelco SK200 excavators. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Solenoid Valve |
| Replaces | Kobelco 38553-61040 |
| Type | Screw-in solenoid cartridge valve, KWE6K-22/G24D16B |
| Coil | SKM6 G24D |
| Voltage | 24V |
| Fits | Kobelco SK200 |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
Kobelco machines
Check the part number on your old unit before ordering.
| Kobelco Part No.(SPM Part No.) | Fits |
|---|---|
| 38553-61040(SPM-HEP-3006) | Kobelco SK200 |
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid cartridge or its coil is the usual suspect. Check for power at the plug first.
Drift or slow response
A worn cartridge that does not shift fully gives slow or weak movement, or lets the function creep.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water and corrosion first.
Fitting tips
Relieve the hydraulic pressure, clean around the valve before removing it, fit the new O rings lightly oiled and tighten to the specified torque.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (12 aftermarket sellers) | USD 45.92 to 72.63 | 6 Oct 2026 |
| WDPart | USD 89.00 | 6 Oct 2026 |
| YEM Parts | USD 107.68 | 6 Oct 2026 |
| MyMROmarts | USD 205.99 | 6 Oct 2026 |
| Spare Part Mart | USD 36.74 | Today |
Our price of USD 36.74 is 20% to 82% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Kobelco 38553-61040. It is not made by or affiliated with Kobelco; the Kobelco part number is used only to show what it replaces.
It fits Kobelco SK200. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same ports, mounting and coil connector as the original. Check the coil voltage matches your old valve, mark the ports before removing it, seal the threads and check for leaks under load.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
