Kobelco YN50S00026F1 is the key ignition switch with a six pin connector, supplied with two keys. It is used on Kobelco excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Ignition Switch |
| Replaces |
Kobelco YN50S00026F1 |
| Switch type |
Key ignition switch |
| Connector |
Six pin plug |
| Supplied with |
Two keys |
| Fits |
Kobelco SK200-8, SK210-8, SK170-8, SK135SR-1E, SK140SRLC and SK235SR-2 excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
853650 |
| Country of Manufacture |
China |
Compatibility
Kobelco machines
Kobelco SK200-8, SK210-8, SK170-8, SK135SR-1E, SK140SRLC and SK235SR-2 excavators
Check the part number on your old unit before ordering.
Part numbers
| Kobelco Part No.(SPM Part No.)
|
Fits |
|
YN50S00026F1(SPM-HEP-4060)
|
Kobelco SK200-8, SK210-8, SK170-8, SK135SR-1E, SK140SRLC and SK235SR-2 excavators |
Applications & use cases
Machine will not start
A worn ignition switch is a common no-start cause once the batteries, fuses and starter relay check out.
Key turns but nothing happens
Worn contacts inside the switch stop the start signal. A new switch comes with its own keys.
Lost keys
Fitting a new switch with its own keys is often quicker than finding a matching key.
Fitting tips
Disconnect the battery, note the wiring, and plug in the new switch at the same connector before tightening the bezel nut.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (2 aftermarket sellers) |
USD 37.29 to 39.99 |
25 Oct 2026 |
| SINOCMP |
USD 39.00 |
23 Oct 2026 |
| FridayParts |
USD 63.06 |
23 Oct 2026 |
| Spare Part Mart |
USD 31.20 |
Today |
Our price of USD 31.20 is 16% to 51% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Is this a genuine Kobelco part?
No. It is an aftermarket part made to fit in place of Kobelco YN50S00026F1. It is not made by or affiliated with Kobelco; the Kobelco part number is used only to show what it replaces.
Will it fit my machine?
It fits Kobelco SK200-8, SK210-8, SK170-8, SK135SR-1E, SK140SRLC and SK235SR-2 excavators. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
Does it fit without changes?
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.