Komatsu 08620-00000 is the brass coolant temperature sender with a single pin terminal. It is used on Komatsu engines. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Water Temperature Sensor |
| Replaces |
Komatsu 08620-00000 |
| Sensor type |
Coolant temperature sender |
| Body |
Brass |
| Terminal |
Single pin terminal |
| Fits |
Komatsu 4D94-2, 4D105-5 and 6D105-1 engines, including PC120-6, PC200-6 and PC220-6 excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
903289 |
| Country of Manufacture |
China |
Compatibility
Komatsu machines
Komatsu 4D94-2, 4D105-5 and 6D105-1 engines, including PC120-6, PC200-6 and PC220-6 excavators
Check the part number on your old unit before ordering.
Part numbers
| Komatsu Part No.(SPM Part No.)
|
Fits |
|
08620-00000(SPM-HEP-4111)
|
Komatsu 4D94-2, 4D105-5 and 6D105-1 engines, including PC120-6, PC200-6 and PC220-6 excavators |
Applications & use cases
Gauge reads cold or wrong
If the temperature gauge stays low or jumps while the engine is warm, the sender is the usual cause. Check the wire and terminal first.
Overheat warning with a cool engine
A failed sender can trigger a false high temperature warning. Swapping the sender confirms it.
Fitting tips
Fit with the engine cold and the coolant drained below the sender, use thread sealant on the taper thread and top up the coolant afterwards.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| FridayParts |
USD 16.80 |
23 Oct 2026 |
| WANATOP (Amazon) |
USD 21.41 |
23 Oct 2026 |
| eBay (2 aftermarket sellers) |
USD 23.61 to 37.90 |
25 Oct 2026 |
| SINOCMP |
USD 31.00 |
23 Oct 2026 |
| Yem Parts |
USD 64.20 |
23 Oct 2026 |
| Spare Part Mart |
USD 13.44 |
Today |
Our price of USD 13.44 is 20% to 79% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Is this a genuine Komatsu part?
No. It is an aftermarket part made to fit in place of Komatsu 08620-00000. It is not made by or affiliated with Komatsu; the Komatsu part number is used only to show what it replaces.
Will it fit my machine?
It fits Komatsu 4D94-2, 4D105-5 and 6D105-1 engines, including PC120-6, PC200-6 and PC220-6 excavators. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
Does it fit without changes?
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.