Komatsu 6209-61-1100 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with flange hub and steel back plate. It is used on Komatsu PC200-6 excavators. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Water Pump |
| Replaces |
Komatsu 6209-61-1100 |
| Fits |
Komatsu S6D95L-1, SA6D95L-1 and SAA6D95LE-1 engines in PC200-6, PC200LC-6L, PC210LC-6L, PC220LC-6L and PC250LC-6L excavators and WA180-3, WA200-3 and WA250-3 wheel loaders |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Komatsu machines
Komatsu S6D95L-1, SA6D95L-1 and SAA6D95LE-1 engines in PC200-6, PC200LC-6L, PC210LC-6L, PC220LC-6L and PC250LC-6L excavators and WA180-3, WA200-3 and WA250-3 wheel loaders
Check the part number on your old unit before ordering.
Part numbers
| Komatsu Part No.(SPM Part No.)
|
Fits |
|
6209-61-1100(SPM-HEP-4481)
|
Komatsu S6D95L-1, SA6D95L-1 and SAA6D95LE-1 engines in PC200-6, PC200LC-6L, PC210LC-6L, PC220LC-6L and PC250LC-6L excavators and WA180-3, WA200-3 and WA250-3 wheel loaders |
Use cases and applications
What it does
It circulates coolant through the block, head and radiator. A worn seal or bearing lets coolant out and the engine overheat.
Where it is used
Made for the Komatsu S6D95L-1, SA6D95L-1, SAA6D95LE-1 engines in PC200-6, PC200LC-6L and 6 more. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| SoonParts |
USD 149.50 |
30 Oct 2026 |
| Propel Parts |
USD 171.63 |
30 Oct 2026 |
| Mottrol USA (Digworks) |
USD 175.25 |
30 Oct 2026 |
| eBay (9 aftermarket sellers) |
USD 182.27 to 226.89 |
30 Oct 2026 |
| Heavy Duty Pros (CTP) |
USD 203.97 |
30 Oct 2026 |
| FridayParts |
USD 248.81 |
30 Oct 2026 |
| KuduParts |
USD 289.63 |
30 Oct 2026 |
| Spare Part Mart |
USD 145.82 |
Today |
Our price of USD 145.82 is 2% to 50% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Komatsu S6D95L-1?
Yes, it was made for the Komatsu S6D95L-1, and 9 more listed under compatible equipment. Check the old water pump is marked 6209-61-1100 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the water pump on my Komatsu S6D95L-1?
On the Komatsu S6D95L-1, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the water pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Should I change the coolant and thermostat too?
If the coolant is old or dirty, yes. Worn coolant is the usual cause of seal failure, and a new pump in old coolant fails the same way.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Is this a genuine Komatsu 6209-61-1100?
No. It is an aftermarket water pump made to replace the Komatsu 6209-61-1100. It is not made by the original manufacturer; the number only shows what it replaces.