No Products in the Cart
Komatsu 714-12-25220 is the transmission control solenoid valve (screw-in cartridge with flying lead and plug). It is used on Komatsu WA270 to WA480 wheel loaders. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Solenoid Valve |
| Replaces | Komatsu 714-12-25220 |
| Type | Screw-in solenoid cartridge valve with lead and connector |
| Fits | Komatsu WA270-8; Komatsu WA320-7; Komatsu WA320-8; Komatsu WA380-5; Komatsu WA380-6; Komatsu WA400-5; Komatsu WA430-5; Komatsu WA430-6; Komatsu WA470-5; Komatsu WA470-6; Komatsu WA470-8; Komatsu WA480-5; Komatsu WA480-6 |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
Komatsu machines
Check the part number on your old unit before ordering.
| Komatsu Part No.(SPM Part No.) | Fits |
|---|---|
| 714-12-25220(SPM-HEP-2995) | Komatsu WA270-8, Komatsu WA320-7, Komatsu WA320-8, Komatsu WA380-5, Komatsu WA380-6, Komatsu WA400-5, Komatsu WA430-5, Komatsu WA430-6, Komatsu WA470-5, Komatsu WA470-6, Komatsu WA470-8, Komatsu WA480-5, Komatsu WA480-6 |
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid cartridge or its coil is the usual suspect. Check for power at the plug first.
Drift or slow response
A worn cartridge that does not shift fully gives slow or weak movement, or lets the function creep.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water and corrosion first.
Fitting tips
Relieve the hydraulic pressure, clean around the valve before removing it, fit the new O rings lightly oiled and tighten to the specified torque.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (12 aftermarket sellers) | USD 47.99 to 67.99 | 6 Oct 2026 |
| WDPart | USD 73.80 | 6 Oct 2026 |
| MyMROmarts | USD 114.78 | 6 Oct 2026 |
| Spare Part Mart | USD 38.39 | Today |
Our price of USD 38.39 is 20% to 67% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Komatsu 714-12-25220. It is not made by or affiliated with Komatsu; the Komatsu part number is used only to show what it replaces.
It fits Komatsu WA270-8; Komatsu WA320-7; Komatsu WA320-8; Komatsu WA380-5; Komatsu WA380-6; Komatsu WA400-5; Komatsu WA430-5; Komatsu WA430-6; Komatsu WA470-5; Komatsu WA470-6; Komatsu WA470-8; Komatsu WA480-5; Komatsu WA480-6. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same ports, mounting and coil connector as the original. Check the coil voltage matches your old valve, mark the ports before removing it, seal the threads and check for leaks under load.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
