Komatsu 7835-31-1003 is the colour cab monitor with function keys and a separate air conditioning keypad, on a cast aluminium finned rear housing with two white multi pin connectors. It is used on Komatsu PC200-8 to PC290-8 excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Monitor Display Panel |
| Replaces |
Komatsu 7835-31-1003 |
| Machine |
Komatsu PC200-8, PC210-8, PC220-8, PC230-8, PC240-8, PC270-8, PC290NLC-8 |
| Size |
250 x 100 x 200 mm |
| Fits |
Komatsu PC200-8, PC210-8, PC220-8, PC230-8, PC240-8, PC270-8 and PC290NLC-8 excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
853120 |
| Country of Manufacture |
China |
Compatibility
Komatsu machines
Komatsu PC200-8, PC210-8, PC220-8, PC230-8, PC240-8, PC270-8 and PC290NLC-8 excavators
Check the part number on your old unit before ordering.
Part numbers
| Komatsu Part No.(SPM Part No.)
|
Fits |
|
7835-31-1003(SPM-HEP-5046)
|
Komatsu PC200-8, PC210-8, PC220-8, PC230-8, PC240-8, PC270-8 and PC290NLC-8 excavators |
Applications & use cases
Blank or flickering screen
A monitor that stays dark, flickers or shows lines once the fuse, power and earth at the plug check out has failed inside. A new unit brings back the gauges and warnings.
Dead buttons or no warnings
Worn keypads stop mode, speed and menu changes, and a failed monitor can miss engine and hydraulic warnings. Replace it before a warning goes unseen.
Water and sun damage
Cab monitors take heat, sunlight and water from open doors and windows. Fogged or cracked screens and corroded plugs are common on older machines.
Fitting tips
Disconnect the battery, compare the plug and the label on the old monitor with the new one, unplug and unbolt the old unit, then fit the new one and check every gauge and warning with the engine running.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 499.00 |
2 Nov 2026 |
| SINOCMP |
USD 849.00 |
2 Nov 2026 |
| YEM Parts |
USD 1,109.11 |
4 Nov 2026 |
| Spare Part Mart |
USD 351.99 |
Today |
Our price of USD 351.99 is 29% to 68% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Komatsu PC200-8?
Yes, it was made for the Komatsu PC200-8, and 6 more listed under compatible equipment. Check the old monitor is marked 7835-31-1003 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the monitor on my Komatsu PC200-8?
On the Komatsu PC200-8, it depends on hours and working conditions. Follow the machine service schedule, and change it when it shows wear rather than waiting for it to fail.
What are the signs the monitor needs replacing?
Leaks, noise, loss of performance, or visible wear compared with a new part. If in doubt, measure it against the sizes in the specifications.
Can I return it if it does not fit?
Yes. Every order is covered by our 30 day money back guarantee. Keep it unused and in its packaging.
Should I keep the old part?
Keep it until the new one is fitted and running. It is the quickest way to compare sizes, connectors and mounting if anything looks different.
Is this a genuine Komatsu 7835-31-1003?
No. It is an aftermarket monitor made to replace the Komatsu 7835-31-1003. It is not made by the original manufacturer; the number only shows what it replaces.