Komatsu 7861-92-3320 is the coolant temperature sender with a brass threaded body and probe, a yellow sleeved lead and a two pin plug. It is used on Komatsu PC200-5 and PC200-6 excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Water Temperature Sensor |
| Replaces |
Komatsu 7861-92-3320 |
| Engine |
Komatsu 6D95 |
| Machine |
Komatsu PC200-5, PC200-6 |
| Fits |
Komatsu PC200-5 and PC200-6 excavators with the 6D95 engine |
| Condition |
New, aftermarket |
| Stat. HS-Code |
903289 |
| Country of Manufacture |
China |
Compatibility
Komatsu machines
Komatsu PC200-5 and PC200-6 excavators with the 6D95 engine
Check the part number on your old unit before ordering.
Part numbers
| Komatsu Part No.(SPM Part No.)
|
Fits |
|
7861-92-3320(SPM-HEP-4695)
|
Komatsu PC200-5 and PC200-6 excavators with the 6D95 engine |
Applications & use cases
Wrong or missing reading
A failed sensor gives a dead or false gauge reading or a warning light.
Fault codes
Check the wiring and plug first; if the sensor itself reads out of range, replace it.
Corrosion
Connectors on machines take water and dirt. A corroded sensor is cheaper to replace than to chase.
Fleet spares
Common sensors are worth keeping in stock for each machine type.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 13.30 |
31 Oct 2026 |
| FridayParts |
USD 19.94 |
31 Oct 2026 |
| Buy Machinery |
USD 28.85 |
31 Oct 2026 |
| All Aftermarket Parts |
USD 29.00 |
31 Oct 2026 |
| Fab Heavy |
USD 32.12 |
31 Oct 2026 |
| KuduParts |
USD 34.00 |
31 Oct 2026 |
| SINOCMP |
USD 35.00 |
31 Oct 2026 |
| Landtop |
USD 39.29 |
31 Oct 2026 |
| MyMROmarts |
USD 73.76 |
31 Oct 2026 |
| Spare Part Mart |
USD 10.96 |
Today |
Our price of USD 10.96 is 18% to 85% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Komatsu PC200-5?
Yes, it was made for the Komatsu PC200-5, and 1 more listed under compatible equipment. Check the old sensor is marked 7861-92-3320 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the sensor on my Komatsu PC200-5?
On the Komatsu PC200-5, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the sensor needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Should I grease the connector?
A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.
Do the fault codes need clearing?
Usually. Clear them after fitting and run the machine, so old codes are not mistaken for a new fault.
Is this a genuine Komatsu 7861-92-3320?
No. It is an aftermarket sensor made to replace the Komatsu 7861-92-3320. It is not made by the original manufacturer; the number only shows what it replaces.