Mitsubishi ME005183 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with flange hub. It is used on Mitsubishi 4DR5 and 4DR7 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Water Pump |
| Replaces |
Mitsubishi ME005183 |
| Fits |
Mitsubishi 4DR5 and 4DR7 engines, including the Kato HD180G excavator and Mitsubishi forklifts |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Mitsubishi machines
Mitsubishi 4DR5 and 4DR7 engines, including the Kato HD180G excavator and Mitsubishi forklifts
Check the part number on your old unit before ordering.
Part numbers
| Mitsubishi Part No.(SPM Part No.)
|
Fits |
|
ME005183(SPM-HEP-4466)
|
Mitsubishi 4DR5 and 4DR7 engines, including the Kato HD180G excavator and Mitsubishi forklifts |
Use cases and applications
What it does
It circulates coolant through the block, head and radiator. A worn seal or bearing lets coolant out and the engine overheat.
Where it is used
Made for the Mitsubishi 4DR5, 4DR7 engines, including the Kato HD180G excavator and Mitsubishi forklifts. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (8 aftermarket sellers) |
USD 120.25 to 142.10 |
29 Oct 2026 |
| YearnParts |
USD 146.42 |
29 Oct 2026 |
| YEM Parts |
USD 184.49 |
3 Nov 2026 |
| All American Aftermarket Parts |
USD 239.00 |
29 Oct 2026 |
| MyMROmarts |
USD 282.99 |
3 Nov 2026 |
| Spare Part Mart |
USD 96.20 |
Today |
Our price of USD 96.20 is 20% to 66% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Mitsubishi 4DR5?
Yes, it was made for the Mitsubishi 4DR5, and 3 more listed under compatible equipment. Check the old water pump is marked ME005183 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the water pump on my Mitsubishi 4DR5?
On the Mitsubishi 4DR5, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the water pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new water pump.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Is this a genuine Mitsubishi ME005183?
No. It is an aftermarket water pump made to replace the Mitsubishi ME005183. It is not made by the original manufacturer; the number only shows what it replaces.