No Products in the Cart
Add lens tissue: $8.55 5% off with this part
Powder-Free Anti-Static Finger Cots for Handl...: Nozzle connector for the Raytools BM115 fiber laser cutting head with the F200 focusing lens. It is the lower assembly of the head: the ceramic ring and nozzle screw into it, and it carries the capacitive height sensing signal and the cutting gas down to the nozzle.
The body is machined aluminium with a square four hole mounting flange, a side block for the sensor and gas fittings, and a knurled lock ring at the nozzle end with an O-ring seal.
The body length is set by the focal length, so order the F200 version for a head fitted with the F200 lens.
| Fits | Raytools BM115 cutting head, F200 focal length |
| Part | Nozzle connector (lower sensor assembly) |
| Body | Aluminium, square four hole flange |
| Nozzle end | Knurled lock ring with O-ring seal |
| Supplied without | Ceramic ring and nozzle |
| Stat. HS-Code | 845690 |
| Country of Manufacture | China |
Raytools
| Dimensions | Raytools Part No.(SPM Part No.) | Fits |
|---|---|---|
| For BM115 heads with the F200 lens | No Raytools equivalent(SPM-LAS-4604-BM115F200) | BM115 |
After a head crash
A collision with the sheet or a tipped part is the usual reason to change the connector: a bent seat or cracked insulation throws the nozzle off centre and upsets the height sensing.
Unstable height control
If the capacitive height control keeps alarming or the cut height drifts after the ceramic ring and nozzle have been changed, the connector itself is the next part to swap.
Keeping a spare
A spare connector turns a crash into a short repair instead of days waiting for a part.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Cloudray | USD 199.00 | 31 Oct 2026 |
| eBay, aftermarket seller | USD 470.68 | 31 Oct 2026 |
| Spare Part Mart | USD 163.78 | Today |
Our price of USD 163.78 is 18% to 65% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Raytools BM115 cutting head, and 1 more listed under compatible equipment. Check the old nozzle connector is marked F200 or one of the cross references, because makers change parts between serial ranges.
On the Raytools BM115 cutting head, laser and plasma nozzles wear in days to weeks, depending on hours of arc or beam time, material and gas. Change it on condition, not by date.
An oval or nicked orifice, spatter stuck on the tip, more dross, a wider cut or bevel on one side, and height sensing errors.
Centre the nozzle on the beam and recalibrate the height sensor. A new nozzle off centre cuts on one side only.
On laser heads, a cracked ceramic ring or a loose nozzle breaks the capacitive height signal. Check that both are seated and clean.
No. It is an aftermarket nozzle connector made to replace the Raytools BM115 F200. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
