No Products in the Cart
SPM-HEP-3041 is the hydraulic pump control (pilot) solenoid valve: a three port valve block with the solenoid, a braided lead and a 2 pin connector. It is used on Komatsu -7 and -8 series excavators (PC160 to PC550). This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Pump Solenoid Valve |
| Replaces | Komatsu 702-21-57500 |
| Type | Pilot solenoid valve block, 3 ports, braided lead and connector |
| Block size | about 48 x 33 x 23 mm |
| Cross References | Komatsu 702-21-55700 |
| Fits | Komatsu PC160LC-7; Komatsu PC180LC-7; Komatsu PC190LC-8; Komatsu PC195LC-8; Komatsu PC300-7; Komatsu PC300-8; Komatsu PC350-7; Komatsu PC350-8; Komatsu PC360-7; Komatsu PC400-7; Komatsu PC400-8; Komatsu PC450-7; Komatsu PC450-8; Komatsu PC550LC-8 |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
Komatsu machines
Check the part number on your old unit before ordering.
| Komatsu Part No.(SPM Part No.) | Fits |
|---|---|
| 702-21-57500(SPM-HEP-3041) | Komatsu PC160LC-7, Komatsu PC180LC-7, Komatsu PC190LC-8, Komatsu PC195LC-8, Komatsu PC300-7, Komatsu PC300-8, Komatsu PC350-7, Komatsu PC350-8, Komatsu PC360-7, Komatsu PC400-7, Komatsu PC400-8, Komatsu PC450-7, Komatsu PC450-8, Komatsu PC550LC-8 |
| Brand | Part No. |
|---|---|
| Komatsu | 702-21-57500 (this page, SPM-HEP-3041) |
| Komatsu | 702-21-55700 |
All of these numbers are the same part.
| Brand | Part No. |
|---|---|
| Komatsu | 702-21-57500 (this page, SPM-HEP-3041) |
| Komatsu | 702-21-55700 |
All of these numbers are the same part.
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid cartridge or its coil is the usual suspect. Check for power at the plug first.
Drift or slow response
A worn cartridge that does not shift fully gives slow or weak movement, or lets the function creep.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water and corrosion first.
Fitting tips
Relieve the hydraulic pressure, clean around the valve before removing it, fit the new O rings lightly oiled and tighten to the specified torque.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (12 aftermarket sellers) | USD 32.29 to 48.99 | 7 Oct 2026 |
| YEM Parts | USD 76.60 | 7 Oct 2026 |
| Diselmart | USD 89.00 | 7 Oct 2026 |
| SINOCMP | USD 99.00 | 7 Oct 2026 |
| WDPart | USD 107.00 | 7 Oct 2026 |
| MyMROmarts | USD 117.99 | 7 Oct 2026 |
| Fab Heavy Parts | USD 143.36 | 7 Oct 2026 |
| Spare Part Mart | USD 25.83 | Today |
Our price of USD 25.83 is 20% to 82% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Komatsu 702-21-57500. It is not made by or affiliated with Komatsu; the Komatsu part number is used only to show what it replaces.
It fits Komatsu PC160LC-7; Komatsu PC180LC-7; Komatsu PC190LC-8; Komatsu PC195LC-8; Komatsu PC300-7; Komatsu PC300-8; Komatsu PC350-7; Komatsu PC350-8; Komatsu PC360-7; Komatsu PC400-7; Komatsu PC400-8; Komatsu PC450-7; Komatsu PC450-8; Komatsu PC550LC-8. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same ports, mounting and coil connector as the original. Check the coil voltage matches your old valve, mark the ports before removing it, seal the threads and check for leaks under load.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
