SPM-HEP-4471 is the engine coolant pump: cast iron body, bearing and shaft, mechanical seal and impeller, with a three groove pulley. It is used on Mitsubishi 6D16 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
It replaces Mitsubishi ME996800 and Mitsubishi ME993748.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Water Pump |
| Replaces |
Mitsubishi ME996800 |
| Pulley |
Three groove |
| Cross references |
Mitsubishi ME993748 |
| Fits |
Mitsubishi 6D16 and 6D16TL engines, including Mitsubishi FD100 and FD150 forklifts |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Mitsubishi machines
Mitsubishi 6D16 and 6D16TL engines, including Mitsubishi FD100 and FD150 forklifts
Check the part number on your old unit before ordering.
Part numbers
| Mitsubishi Part No.(SPM Part No.)
|
Fits |
|
ME996800(SPM-HEP-4471)
|
Mitsubishi 6D16 and 6D16TL engines, including Mitsubishi FD100 and FD150 forklifts |
|
ME993748(SPM-HEP-4471)
|
Mitsubishi 6D16 and 6D16TL engines, including Mitsubishi FD100 and FD150 forklifts |
Use cases and applications
What it does
It circulates coolant through the block, head and radiator. A worn seal or bearing lets coolant out and the engine overheat.
Where it is used
Made for the Mitsubishi 6D16, 6D16TL engines, including Mitsubishi FD100 and FD150 forklifts. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (7 aftermarket sellers) |
USD 147.42 to 178.84 |
29 Oct 2026 |
| MyMROmarts |
USD 259.99 |
1 Nov 2026 |
| FridayParts |
USD 278.25 |
29 Oct 2026 |
| Yem Parts |
USD 326.29 |
1 Nov 2026 |
| Buy Machinery Parts |
USD 363.24 |
1 Nov 2026 |
| Spare Part Mart |
USD 120.59 |
Today |
Our price of USD 120.59 is 18% to 67% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Mitsubishi 6D16?
Yes, it was made for the Mitsubishi 6D16, and 3 more listed under compatible equipment. Check the old water pump is marked ME996800 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the water pump on my Mitsubishi 6D16?
On the Mitsubishi 6D16, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the water pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Should I change the coolant and thermostat too?
If the coolant is old or dirty, yes. Worn coolant is the usual cause of seal failure, and a new pump in old coolant fails the same way.
Is this a genuine Mitsubishi ME996800?
No. It is an aftermarket water pump made to replace the Mitsubishi ME996800. It is not made by the original manufacturer; the number only shows what it replaces.