SPM-HEP-4571 is the engine oil pump: a cast iron body with a three hole mounting flange, a drive gear and a meshing idler gear. It is used on Cummins 6CT engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
It replaces Cummins 4941464 and Cummins 3991123.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Oil Pump |
| Replaces |
Cummins 4941464 |
| Engine |
Cummins 6CT8.3 / L8.9 |
| Cross references |
Cummins 3991123 |
| Fits |
Cummins 6CT8.3, 6L and L8.9 engines, including the 6CT in Komatsu PC360-7 excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Cummins machines
Cummins 6CT8.3, 6L and L8.9 engines, including the 6CT in Komatsu PC360-7 excavators
Check the part number on your old unit before ordering.
Part numbers
| Cummins Part No.(SPM Part No.)
|
Fits |
|
4941464(SPM-HEP-4571)
|
Cummins 6CT8.3, 6L and L8.9 engines, including the 6CT in Komatsu PC360-7 excavators |
|
3991123(SPM-HEP-4571)
|
Cummins 6CT8.3, 6L and L8.9 engines, including the 6CT in Komatsu PC360-7 excavators |
Applications & use cases
Low oil pressure
A warning light or low gauge reading with the right oil level and a good sender often means a worn oil pump.
Engine rebuilds
Fit a new oil pump whenever the engine is rebuilt or the bearings are changed. Worn gears undo a fresh rebuild.
Noise from the bottom end
Rattles at start-up while the pressure builds are a sign the pump is not priming quickly enough.
Fitting tips
Prime the pump with clean oil, fit new gaskets and O rings, and check the pickup screen before closing up.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (3 aftermarket sellers) |
USD 78.99 to 85.45 |
30 Oct 2026 |
| FridayParts |
USD 120.75 |
31 Oct 2026 |
| HeavyDutyKits (PAI) |
USD 192.61 |
31 Oct 2026 |
| SINOCMP |
USD 239.00 |
30 Oct 2026 |
| Spare Part Mart |
USD 63.19 |
Today |
Our price of USD 63.19 is 20% to 74% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Cummins 6CT8.3?
Yes, it was made for the Cummins 6CT8.3, and 2 more listed under compatible equipment. Check the old oil pump is marked 4941464 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the oil pump on my Cummins 6CT8.3?
On the Cummins 6CT8.3, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the oil pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
Is this a genuine Cummins 4941464?
No. It is an aftermarket oil pump made to replace the Cummins 4941464. It is not made by the original manufacturer; the number only shows what it replaces.