SPM-HEP-4781 is the BorgWarner S200G type wastegated turbocharger with the actuator and braided boost line fitted, a single entry four bolt exhaust inlet flange and an aluminium compressor housing. It is used on JCB JS200, JS210 and JS220 excavators. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
It replaces JCB 320/06296 and BorgWarner 12589700062.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Turbocharger |
| Replaces |
JCB 320/06296 |
| Turbo model |
S200G |
| Machine |
JCB JS200, JS210, JS220 |
| Turbine inlet |
Single entry, four bolt flange |
| Wastegate |
Yes, actuator fitted |
| Cross references |
BorgWarner 12589700062 |
| Fits |
JCB JS200, JS210 and JS220 tracked excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841480 |
| Country of Manufacture |
China |
Compatibility
JCB machines
JCB JS200, JS210 and JS220 tracked excavators
Check the part number on your old unit before ordering.
Part numbers
| JCB Part No.(SPM Part No.)
|
Fits |
|
320/06296 / 32006296 / BorgWarner 12589700062(SPM-HEP-4781)
|
JCB JS200, JS210 and JS220 tracked excavators |
Cross references
| Brand |
Part No. |
| JCB |
320/06296
|
| BorgWarner |
12589700062 |
All of these numbers are the same part.
Use cases and applications
What it does
Exhaust gas spins the turbine, which drives the compressor wheel on the same shaft and pushes more air into the engine. More air lets the engine burn more fuel cleanly, giving the rated power.
Where it is used
Made for the JCB JS200, JS210 and JS220 tracked excavators. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (5 aftermarket sellers) |
USD 503.04 to 650.00 |
1 Nov 2026 |
| SINOCMP |
USD 529.00 |
1 Nov 2026 |
| Amazon (meng li heng) |
USD 535.96 |
1 Nov 2026 |
| Amazon (DoraKvi -Parts Store) |
USD 600.81 |
1 Nov 2026 |
| FridayParts |
USD 787.52 |
1 Nov 2026 |
| Spare Part Mart |
USD 420.04 |
Today |
Our price of USD 420.04 is 16% to 47% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my JCB JCB JS200?
Yes, it was made for the JCB JCB JS200, and 2 more listed under compatible equipment. Check the old turbocharger is marked 320/06296 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the turbocharger on my JCB JCB JS200?
On the JCB JCB JS200, often as long as the engine, 8,000 hours or more, when the oil and air filters are kept on schedule. Most turbos fail early from oil or dirt problems, not age.
What are the signs the turbocharger needs replacing?
Blue or black smoke, a whistle or siren noise, loss of power, oil in the intake or exhaust, or the shaft rubbing the housing.
Is shaft play normal?
A little radial play is normal on journal bearing turbos. Wheels touching the housing, or any noticeable end float, are not.
Should I change the oil and filter as well?
Yes. Fit new oil and a new filter, and replace the oil feed and drain gaskets. Make sure the drain line is clear and runs downhill.
Is this a genuine JCB 320/06296?
No. It is an aftermarket turbocharger made to replace the JCB 320/06296. It is not made by the original manufacturer; the number only shows what it replaces.