Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
SPM-HEP-4810 Common Rail Fuel Injector
SPM-HEP-4810 Common Rail Fuel Injector, second view

SPM-HEP-4810 Common Rail Fuel Injector

$72.79 USD
  • SKU: SPM-HEP-4810-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 0.5 kg (1.1 lb)
Members earn 72 points on this order. Join today to earn 200 points off your first order.

SPM-HEP-4810 is the Bosch type CRIN solenoid common rail injector with a two stud terminal, a side high pressure inlet and two body O rings. It is used on Cummins QSC8.3 and ISC 8.3 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.

It replaces Bosch 0445120272 and Cummins 5263305.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Common Rail Fuel Injector
Replaces Bosch 0445120272
Injector type Solenoid common rail (CRIN)
Engine Cummins QSC8.3, ISC 8.3
Cross references Cummins 5263305
Fits the Cummins QSC8.3 and ISC 8.3 litre diesel engines, as fitted to Case and Komatsu machines
Condition New, aftermarket
Stat. HS-Code 840999
Country of Manufacture China
Compatibility

Machines

the Cummins QSC8.3 and ISC 8.3 litre diesel engines, as fitted to Case and Komatsu machines

Check the part number on your old unit before ordering.

Part numbers
Bosch Part No.(SPM Part No.) Fits
0445120272 / Cummins 5263305(SPM-HEP-4810) the Cummins QSC8.3 and ISC 8.3 litre diesel engines, as fitted to Case and Komatsu machines
Cross references
Brand Part No.
Bosch 0445120272
Cummins 5263305

All of these numbers are the same part.

Use cases and applications

What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.

Where it is used
Made for the Cummins QSC8.3, ISC 8.3 litre diesel engines, as fitted to Case and Komatsu machines. The full list is in the tables above.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay (6 aftermarket sellers) USD 87.49 to 89.00 1 Nov 2026
FridayParts USD 123.89 1 Nov 2026
DeedParts USD 136.13 2 Nov 2026
SINOCMP USD 139.00 1 Nov 2026
Buy Machinery Parts USD 155.87 2 Nov 2026
Yem Parts USD 156.06 2 Nov 2026
Spare Part Mart USD 72.79 Today

Our price of USD 72.79 is 17% to 53% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Cummins QSC8.3?

Yes, it was made for the Cummins QSC8.3, and 3 more listed under compatible equipment. Check the old fuel injector is marked 0445120272 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the fuel injector on my Cummins QSC8.3?

On the Cummins QSC8.3, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.

What are the signs the fuel injector needs replacing?

Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.

Do I need new sealing washers?

Always. Fit a new copper washer and O-rings under every injector you remove. A reused washer leaks combustion gas and carbon packs the bore.

How do I find the bad one?

Run a return leak test or read the injector balance rates with a diagnostic tool. On older mechanical engines, cracking each pipe in turn at idle shows which cylinder changes least.

Is this a genuine Bosch 0445120272?

No. It is an aftermarket fuel injector made to replace the Bosch 0445120272. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

Related products

BACK TO TOP
Chat directly with MikeThe founder