SPM-HEP-4818 is the Denso type electronic common rail injector with a top two stud terminal, a side high pressure inlet on a black cast body with a leak off fitting, and a slim nozzle body. It is used on Isuzu 4HK1 engines (Hitachi ZX200-3). This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
It replaces Denso 095000-6392 and Isuzu 8-97609791-2.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-6392 |
| Injector type |
Electronic common rail |
| Engine |
Isuzu 4HK1 |
| Machine |
Hitachi ZX200-3 |
| Cross references |
Isuzu 8-97609791-2 |
| Fits |
the Isuzu 4HK1 diesel engine, including the 4HK1 in Hitachi ZX200-3 excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the Isuzu 4HK1 diesel engine, including the 4HK1 in Hitachi ZX200-3 excavators
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-6392 / Isuzu 8-97609791-2(SPM-HEP-4818)
|
the Isuzu 4HK1 diesel engine, including the 4HK1 in Hitachi ZX200-3 excavators |
Cross references
| Brand |
Part No. |
| Denso |
095000-6392
|
| Isuzu |
8-97609791-2 |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Isuzu 4HK1 diesel engine and including the 4HK1 in Hitachi ZX200-3 excavators. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (6 aftermarket sellers) |
USD 95.67 to 189.00 |
1 Nov 2026 |
| SINOCMP |
USD 199.00 |
1 Nov 2026 |
| Spare Part Mart |
USD 76.54 |
Today |
Our price of USD 76.54 is 20% to 62% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Isuzu 4HK1 diesel engine?
Yes, it was made for the Isuzu 4HK1 diesel engine, and 1 more listed under compatible equipment. Check the old fuel injector is marked 095000-6392 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injector on my Isuzu 4HK1 diesel engine?
On the Isuzu 4HK1 diesel engine, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
Does it need coding to the engine?
Most common rail injectors carry a trim code (QR or IMA) printed on the body. Enter it with a diagnostic tool after fitting, or the engine runs rough and smokes.
What should I do before fitting it?
Clean the bore and seat of carbon, and keep the nozzle capped until it goes in. Torque the clamp to the engine manual, not by feel.
Is this a genuine Denso 095000-6392?
No. It is an aftermarket fuel injector made to replace the Denso 095000-6392. It is not made by the original manufacturer; the number only shows what it replaces.