SPM-HEP-4857 is the Denso type electronic common rail injector with a connector on a short lead, a banjo bolt leak off fitting, a threaded side high pressure inlet and a slim nozzle body. It is used on Hino E13C engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
It replaces Denso 095000-8890 and Hino 23670-E0460.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Denso 095000-8890 |
| Injector type |
Electronic common rail |
| Engine |
Hino E13C |
| Cross references |
Hino 23670-E0460 |
| Fits |
the Hino E13C diesel engine used in Hino trucks and Kobelco excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the Hino E13C diesel engine used in Hino trucks and Kobelco excavators
Check the part number on your old unit before ordering.
Part numbers
| Denso Part No.(SPM Part No.)
|
Fits |
|
095000-8890 / Hino 23670-E0460(SPM-HEP-4857)
|
the Hino E13C diesel engine used in Hino trucks and Kobelco excavators |
Cross references
| Brand |
Part No. |
| Denso |
095000-8890
|
| Hino |
23670-E0460 |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Hino E13C diesel engine used in Hino trucks and Kobelco excavators. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (6 aftermarket sellers) |
USD 112.44 to 121.18 |
1 Nov 2026 |
| SINOCMP |
USD 179.00 |
1 Nov 2026 |
| Fab Heavy Parts |
USD 297.92 |
1 Nov 2026 |
| Spare Part Mart |
USD 88.60 |
Today |
Our price of USD 88.60 is 21% to 70% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Denso 095000-8890?
Yes, it is a direct replacement for the Denso 095000-8890 with the same fitting.
How often should I replace the Denso 095000-8890?
Often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
How do I find the bad one?
Run a return leak test or read the injector balance rates with a diagnostic tool. On older mechanical engines, cracking each pipe in turn at idle shows which cylinder changes least.
What should I do before fitting it?
Clean the bore and seat of carbon, and keep the nozzle capped until it goes in. Torque the clamp to the engine manual, not by feel.
Is this a genuine Denso 095000-8890?
No. It is an aftermarket fuel injector made to replace the Denso 095000-8890. It is not made by the original manufacturer; the number only shows what it replaces.