SPM-HEP-4880 is the Bosch type electronic common rail injector with a black two hole hold down flange, a top two stud terminal and a slim nozzle. It is used on Cummins ISBe 6.7 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
It replaces Bosch 0445120018 and Cummins 3949619.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Common Rail Fuel Injector |
| Replaces |
Bosch 0445120018 |
| Injector type |
Electronic common rail |
| Engine |
Cummins ISBe 6.7 |
| Cross references |
Cummins 3949619 |
| Fits |
the Cummins ISBe 6.7 diesel engine |
| Condition |
New, aftermarket |
| Stat. HS-Code |
840999 |
| Country of Manufacture |
China |
Compatibility
Machines
the Cummins ISBe 6.7 diesel engine
Check the part number on your old unit before ordering.
Part numbers
| Bosch Part No.(SPM Part No.)
|
Fits |
|
0445120018 / Cummins 3949619(SPM-HEP-4880)
|
the Cummins ISBe 6.7 diesel engine |
Cross references
| Brand |
Part No. |
| Bosch |
0445120018
|
| Cummins |
3949619 |
All of these numbers are the same part.
Use cases and applications
What it does
A common rail injector opens electrically several times per combustion stroke, spraying fuel at very high pressure. Its timing and flow are set by the engine controller using the trim code on its body.
Where it is used
Made for the Cummins ISBe 6.7 diesel engine.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (5 aftermarket sellers) |
USD 99.00 to 130.21 |
1 Nov 2026 |
| SINOCMP |
USD 129.00 |
1 Nov 2026 |
| MyMROmarts |
USD 151.80 |
1 Nov 2026 |
| KuduParts |
USD 151.90 |
1 Nov 2026 |
| Buy Machinery |
USD 156.90 |
1 Nov 2026 |
| WDPart |
USD 164.00 |
1 Nov 2026 |
| Fab Heavy |
USD 196.00 |
1 Nov 2026 |
| Spare Part Mart |
USD 81.58 |
Today |
Our price of USD 81.58 is 18% to 58% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Cummins ISBe 6.7 diesel engine?
Yes, it was made for the Cummins ISBe 6.7 diesel engine. Check the old fuel injector is marked 0445120018 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injector on my Cummins ISBe 6.7 diesel engine?
On the Cummins ISBe 6.7 diesel engine, often 5,000 to 10,000 hours, but much less on poor or wet fuel. Injectors are usually changed when they fail a test, not by hours.
What are the signs the fuel injector needs replacing?
Black or white smoke, a misfire or knock on one cylinder, hard starting, higher fuel use, or a high return leak or balance rate on test.
Does it need coding to the engine?
Most common rail injectors carry a trim code (QR or IMA) printed on the body. Enter it with a diagnostic tool after fitting, or the engine runs rough and smokes.
Should I replace all of them at once?
Not always. If the others pass a return leak or balance test, one can be changed. Where they are all high hours, a full set keeps the cylinders even.
Is this a genuine Bosch 0445120018?
No. It is an aftermarket fuel injector made to replace the Bosch 0445120018. It is not made by the original manufacturer; the number only shows what it replaces.