Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
SPM-HEP-5062 Main Controller
SPM-HEP-5062 Main Controller

SPM-HEP-5062 Main Controller

$295.20 USD
  • SKU: SPM-HEP-5062-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 2.0 kg (4.41 lb)
Members earn 295 points on this order. Join today to earn 200 points off your first order.

SPM-HEP-5062 is the machine controller in a grey cast aluminium case with slotted mounting feet and a sealed multi pin connector block along one edge. It is used on Hitachi EX150LC-5 excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.

It replaces Hitachi 4376708 and Hitachi X4376708.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Main Controller
Replaces Hitachi 4376708
Machine Hitachi EX150LC-5, EX165LC
Cross references Hitachi X4376708
Fits Hitachi EX150LC-5 and EX165LC excavators
Condition New, aftermarket
Stat. HS-Code 853710
Country of Manufacture China
Compatibility

Hitachi machines

Hitachi EX150LC-5 and EX165LC excavators

Check the part number on your old unit before ordering.

Part numbers
Hitachi Part No.(SPM Part No.) Fits
4376708(SPM-HEP-5062) Hitachi EX150LC-5 and EX165LC excavators
X4376708(SPM-HEP-5062) Hitachi EX150LC-5 and EX165LC excavators

Applications & use cases

Fault codes and dead functions
When functions stop working together or the display shows controller faults, a failed controller is a common cause once wiring and connectors check out.

Water and impact damage
Controllers take knocks, vibration and water. A cracked or corroded unit fails soon after.

Quicker than repair
A replacement unit is quicker than repairing boards and components one at a time.

Fleet spares
A spare controller turns a breakdown into a swap.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay, aftermarket seller USD 412.00 2 Nov 2026
SINOCMP USD 499.00 2 Nov 2026
FridayParts USD 605.27 2 Nov 2026
Spare Part Mart USD 295.20 Today

Our price of USD 295.20 is 28% to 51% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Hitachi EX150LC-5?

Yes, it was made for the Hitachi EX150LC-5, and 1 more listed under compatible equipment. Check the old controller is marked 4376708 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the controller on my Hitachi EX150LC-5?

On the Hitachi EX150LC-5, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.

What are the signs the controller needs replacing?

A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.

How do I test the old part first?

Read the fault codes, then check the plug and wiring for corrosion or a broken wire. A wiring fault reads the same as a failed controller.

Should I grease the connector?

A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.

Is this a genuine Hitachi 4376708?

No. It is an aftermarket controller made to replace the Hitachi 4376708. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.
BACK TO TOP
Chat directly with MikeThe founder