SPM-HEP-5140 is the VE type distributor injection pump with the drive gear fitted: cast alloy body with the boost compensator, the fuel shutoff solenoid and leads, green sensor connector, four capped delivery valves and the timing gear on the drive shaft. It is used on Isuzu 4JB1-TC engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
It replaces Zexel 104646-5113 and Zexel 104746-5113.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Injection Pump |
| Replaces |
Zexel 104646-5113 |
| Engine |
Isuzu 4JB1-TC 2.8 L |
| Pump type |
VE4/11F1900R distributor pump |
| Cross references |
Zexel 104746-5113 |
| Fits |
the Isuzu 4JB1-TC 2.8 L turbo diesel engine |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Machines
the Isuzu 4JB1-TC 2.8 L turbo diesel engine
Check the part number on your old unit before ordering.
Part numbers
| Zexel Part No.(SPM Part No.)
|
Fits |
|
104646-5113(SPM-HEP-5140)
|
the Isuzu 4JB1-TC 2.8 L turbo diesel engine |
|
104746-5113(SPM-HEP-5140)
|
the Isuzu 4JB1-TC 2.8 L turbo diesel engine |
Applications & use cases
Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.
Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.
Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.
Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 536.13 |
2 Nov 2026 |
| SINOCMP |
USD 769.00 |
2 Nov 2026 |
| YEM Parts |
USD 1,210.13 |
2 Nov 2026 |
| Buy Machinery Parts |
USD 1,416.82 |
2 Nov 2026 |
| Spare Part Mart |
USD 399.20 |
Today |
Our price of USD 399.20 is 26% to 72% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Zexel 104646-5113?
Yes, it is a direct replacement for the Zexel 104646-5113 with the same fitting.
How often should I replace the Zexel 104646-5113?
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the fuel injection pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new fuel injection pump.
Is this a genuine Zexel 104646-5113?
No. It is an aftermarket fuel injection pump made to replace the Zexel 104646-5113. It is not made by the original manufacturer; the number only shows what it replaces.