No Products in the Cart
| Burst Pressure | 21 bar (305 PSI) |
| Element Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Wire Mesh 90 µm |
| Media type | Wire Mesh |
| Filtration Rating | 90 µm |
| Total Height | 145 mm (5 23/32") |
| Thread | GAS 3/4 inch Female Bottom |
| Type | GAS |
| Thread Size | 3/4 inch |
| Orientation | Female |
| Position | Bottom |
| Bypass Valve Opening Pressure | 1.75 bar (25 PSI) |
| Working Pressure | 12 bar (174 PSI) |
| Outer Diameter | 96 mm (3 25/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Donaldson | CAR60 |
| Fai Filtri | CTT-050-0-3-M90-A |
| Filtrec | A210T125BM |
| Omt | CSM05ENR |
| Oxfil | OF.8813 |
| Sofima (UFI) | CA151EMCV1M |
| Sofima (UFI) | CA151MCV1BM |
| Sofima (UFI) | CCA151EMCV1M |
| Sofima (UFI) | CCA151MCV1BM |
| Spare Part Mart | SPM-OIL-1385 |
| Stauff | SFCT35125E |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1385.
Heavy-Duty Hydraulic Systems
In earthmoving or agricultural machinery exposed to high dust loads, the 90-micron wire mesh captures hard particles before they can score cylinders or clog fine-tolerance spool valves. This reduces unscheduled downtime and extends component life.
Continuous Production Plants
For presses, injection moulding machines, and conveyor drives running around the clock, the 21-bar burst pressure rating provides a safety margin under cyclic loading. The bypass valve sustains lubrication flow during cold startup or at high viscosity, avoiding momentary starvation.
Multi-Brand Workshops
A service centre maintaining equipment from different manufacturers can replace multiple branded part numbers with a single this filter, provided the thread and canister dimensions match. This cuts inventory holding costs and reduces the risk of mis-picking during routine servicing.
Preventative Maintenance Routines
When used as part of scheduled oil changes at 250- to 500-hour intervals, the consistent 90-micron cleanliness level helps maintenance planners predict oil service life and delay costly fluid replacements, keeping total cost of ownership low.
It is engineered as a direct spin-on replacement where a GAS 3/4-inch female bottom thread, 96 mm canister diameter, and 145 mm overall height are required. If your current filter carries a part number from Donaldson, Fai Filtri, Filtrec, Omt, Oxfil, Sofima (UFI), or Stauff with matching specifications, this filter will install without modification. Always measure your housing and compare thread type before ordering.
The element is built with layered wire mesh that delivers a nominal 90-micron absolute filtration, meaning particles larger than 90 µm are reliably trapped. The all-metal construction withstands high differential pressure and repeated flow surges better than cellulose or synthetic fibre alternatives, and it is compatible with mineral and most synthetic hydraulic oils.
Thread details are GAS 3/4-inch type, female orientation on the bottom face. The canister measures 96 mm across and stands 145 mm tall. These dimensions match typical European-style spin-on hydraulic return and suction filters in that form factor. Verify the sealing surface and gasket diameter are compatible before first fitment.
No, this filter is a quality aftermarket filter built to mirror the critical interface dimensions, thread, and performance envelope of the branded equivalents. It functions identically in the system while helping you avoid the inflated cost of bagged-and-labelled OEM components, without compromising fit or filtration performance.
Remove the old filter with a strap wrench or socket, clean the housing face, and apply a light film of clean oil to the new gasket. Spin the filter on by hand until the gasket touches, then tighten an additional half to three-quarters of a turn. Always follow the equipment manufacturer’s torque guidance and prime the system before restarting to prevent dry starts.
Spare Part Mart dispatches orders worldwide with full tracking visibility. We back every SPM filter with a 30-day money-back guarantee and a price-beat promise, so if you find a like-for-like replacement listed cheaper we will match or better the price. Contact support for freight estimates to your location.
