No Products in the Cart
| Element Collapse pressure | 10 bar (145 PSI) |
| Filtration Media | Inorganic Microfibers 25 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 25 µm |
| Total Height | 230 mm (9 1/16") |
| Bypass Valve Opening Pressure | 1.75 bar (25 PSI) |
| Smallest Inner Diameter | 64 mm (2 17/32") |
| Outer Diameter | 130 mm (5 1/8") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | F-43-A25-M |
| Filtrec | R163G25B |
| Oxfil | OF.8960 |
| Sofima (UFI) | CRE125FV1 |
| Sofima (UFI) | RE125FV1 |
| Spare Part Mart | SPM-OIL-1460 |
Found this part cheaper somewhere else? Send us the listing and we'll beat any genuine competitor's price under our Price Beat Guarantee. We continually benchmark the market so you don't have to, so you can buy with confidence knowing you're getting the best available price on Spare Part Mart SPM-OIL-1460.
Continuous-Duty Hydraulic Systems
For plant running 24/7, a 25 µm rating with high dirt-holding capacity extends service intervals compared to standard cellulose media. The robust element withstands constant pressure cycling, reducing unscheduled downtime.
High-Contamination Environments
In quarries, foundries or wood processing, airborne dust loads oil quickly. The inorganic microfibre material traps fine particles effectively, protecting pumps and valves from abrasive wear.
Fleet Maintenance Consolidation
Operators with mixed-brand machinery can standardise on one aftermarket filter rather than stocking multiple OEM numbers. This simplifies inventory and lowers per-unit cost while maintaining filtration quality.
Preventive Replacement Planning
By choosing a direct replacement with predictable performance, maintenance teams can schedule filter changes during planned outages. The clear collapse and bypass specs give confidence in the element's ability to handle cold-start pressure spikes.
Compare the dimensions and bypass pressure to your current element. This filter has a total height of 230 mm, an outer diameter of 130 mm, a smallest inner diameter of 64 mm and a bypass opening pressure of 1.75 bar. Also check that your existing filter carries one of the cross-referenced brand part numbers from Fai Filtri, Filtrec, Oxfil or Sofima (UFI).
This filter uses inorganic microfibre media with an absolute filtration rating of 25 µm. This synthetic material provides higher contaminant retention and better resistance to water and chemicals compared to traditional cellulose, helping maintain oil cleanliness over longer intervals.
Total height is 230 mm, outer diameter 130 mm, smallest inner diameter 64 mm. The element collapse pressure is 10 bar, and the bypass valve opens at 1.75 bar. These match the OEM specifications for the equivalent branded cartridges.
No, this is an aftermarket direct replacement for the branded filters listed. It is manufactured to match the OEM specifications in form, fit and function but is not produced by Fai Filtri, Filtrec, Oxfil or Sofima. You receive equivalent filtration performance at a lower cost.
First, clean the housing and replace any O-rings or seals. Pre-fill the filter with clean oil if the design allows it. Insert the cartridge squarely and tighten according to the equipment manual. After installation, run the system briefly and check for leaks around the sealing surfaces.
Spare Part Mart provides a 30-day money-back guarantee on all filters. We also have a price-beat guarantee so you can be confident you are getting the best value. Orders are shipped with worldwide tracking.
