No Products in the Cart
Sullair 02250088-348 is the inlet (intake) valve that opens to load the compressor and closes to unload it used on Sullair rotary screw air compressors. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Intake Valve |
| Replaces | Sullair 02250088-348 |
| Type | Inlet valve body with valve plate, threaded inlet and four bolt mounting flange |
| Supplied as | Single valve |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
| Sullair Part No.(SPM Part No.) |
|---|
| 02250088-348(SPM-ACP-2837) |
Compressor will not load or unload
The intake valve opens to load the compressor and closes to unload it. A sticking valve leaves the machine running unloaded or stops it unloading, which trips it on high pressure.
Oil blowing back through the air filter
A worn valve plate or check function lets oil mist escape back into the intake when the compressor stops. Replace the valve before it soaks the filter and the cooler.
Slow loading or low capacity
A tired spring, worn seals or a scored piston keep the valve from opening fully, so the compressor delivers less air than it should.
Fitting tips
Isolate, vent and lock out the compressor. Fit a new gasket or O ring at the flange, reconnect the control lines exactly as before and check loading and unloading before putting it back to work.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (5 aftermarket sellers) | USD 550.00 to 879.00 | 6 Oct 2026 |
| Spare Part Mart | USD 440.00 | Today |
Our price of USD 440.00 is 20% to 50% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Sullair 02250088-348. It is not made by or affiliated with Sullair; the Sullair part number is used only to show what it replaces.
It fits machines that take Sullair 02250088-348. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It is made to the same mounting and connections as the original part. Fit new gaskets and seals where they are used, and check for leaks and correct operation before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
