No Products in the Cart
Sullair 88290012-751 is the 115 V condensate drain solenoid valve. It is used on Sullair rotary screw air compressors. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Drain Solenoid Valve |
| Replaces | Sullair 88290012-751 |
| Type | 2 way normally closed brass body drain solenoid valve |
| Coil | 115 V AC, DIN plug connector |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
| Sullair Part No.(SPM Part No.) |
|---|
| 88290012-751(SPM-ACP-2742) |
Water in the air lines
A drain valve that no longer opens lets condensate build up in the separator or receiver and carry into the air lines. Check that the valve clicks open on its timer or level signal.
Air blowing from the drain constantly
A worn seat or dirt under the plunger leaves the valve stuck open, wasting compressed air. A new valve stops the loss.
Burned coil
A coil that reads open on a meter, or a valve that stays shut with power at the plug, needs replacing. Check the supply voltage matches the coil.
Fitting tips
Isolate power and vent the system first. Fit the valve with the flow arrow the right way round, use thread sealant on the pipe threads, and test the drain cycle before leaving the machine.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (4 aftermarket sellers) | USD 158.25 to 229.69 | 6 Oct 2026 |
| Spare Part Mart | USD 126.60 | Today |
Our price of USD 126.60 is 20% to 45% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Sullair 88290012-751. It is not made by or affiliated with Sullair; the Sullair part number is used only to show what it replaces.
It fits machines that take Sullair 88290012-751. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same ports, mounting and coil connector as the original. Check the coil voltage matches your old valve, mark the ports before removing it, seal the threads and check for leaks under load.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
