Denso 096000-8570 is the VE type six cylinder distributor injection pump: cast alloy body with the boost compensator on top, governor levers, the black fuel shutoff solenoid block, six delivery valves and a keyed drive shaft. It is used on Toyota 1HD-T engines (HDJ80). This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Denso 22100-17580.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Injection Pump |
| Replaces |
Toyota 22100-17580 |
| Engine |
Toyota 1HD-T 4.2 L |
| Vehicle |
Toyota Land Cruiser HDJ80 |
| Type |
VE distributor pump |
| Cross references |
Denso 096000-8570 |
| Fits |
the Toyota 1HD-T 4.2 L turbo diesel in the Land Cruiser 80 series (HDJ80) |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Machines
the Toyota 1HD-T 4.2 L turbo diesel in the Land Cruiser 80 series (HDJ80)
Check the part number on your old unit before ordering.
Part numbers
| Toyota Part No.(SPM Part No.)
|
Fits |
|
22100-17580(SPM-HEP-5146)
|
the Toyota 1HD-T 4.2 L turbo diesel in the Land Cruiser 80 series (HDJ80) |
|
096000-8570(SPM-HEP-5146)
|
the Toyota 1HD-T 4.2 L turbo diesel in the Land Cruiser 80 series (HDJ80) |
Applications & use cases
Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.
Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.
Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.
Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (3 aftermarket sellers) |
USD 664.75 to 688.20 |
2 Nov 2026 |
| SINOCMP |
USD 689.00 |
2 Nov 2026 |
| Spare Part Mart |
USD 531.80 |
Today |
Our price of USD 531.80 is 20% to 23% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Denso 096000-8570?
Yes, it is a direct replacement for the Denso 096000-8570 with the same fitting.
How often should I replace the Denso 096000-8570?
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the fuel injection pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Is this a genuine Denso 096000-8570?
No. It is an aftermarket fuel injection pump made to replace the Denso 096000-8570. It is not made by the original manufacturer; the number only shows what it replaces.