No Products in the Cart
Aftermarket ceramic nozzle holder for Trumpf 3D and tube laser cutting. Replaces Trumpf 913966, also listed as 936678/00-WO.
This is the small holder used on 3D and tube cutting heads: a tapered ceramic body 17.5 mm across and 17.7 mm high, with an M6 brass nozzle thread and a brass contact ring at the base.
It fits the TruLaser Tube 5000 and 7000, the TruLaser Cell 7040 and the TLC 1005 where this holder is used. Sold in packs of 1, 5 or 10.
| Replaces | Trumpf 936678, 913966/00-WO |
| Nozzle Thread | M6 |
| Diameter | 17.5 mm |
| Height | 17.7 mm |
| Material | Technical ceramic, brass nozzle thread and contact ring |
| Pack Options | 1 pack, 5 pack, 10 pack |
Trumpf machines
3D and tube laser cutting heads, as listed by Trumpf parts suppliers for 936678 / 913966. Match the part number on your current holder.
| Pack | Dimensions | Trumpf Part No.(SPM Part No.) | Fits |
|---|---|---|---|
| M6 thread, 17.5 mm diameter, 17.7 mm high | M6 thread, 17.5 mm diameter, 17.7 mm high | 936678(SPM-LAS-2157) | TruLaser Tube 5000, TruLaser Tube 7000, TruLaser Cell 7040, TLC 1005 |
| M6 thread, 17.5 mm diameter, 17.7 mm high | M6 thread, 17.5 mm diameter, 17.7 mm high | 913966(SPM-LAS-2157) | TruLaser Tube 5000, TruLaser Tube 7000, TruLaser Cell 7040, TLC 1005 |
Tube and profile cutting
Tube heads work close to the part and hit edges and weld seams. Holders crack more often than on flat bed machines, so keep spares.
Height sensing errors
A cracked holder or worn contact ring gives unstable height readings on 3D paths. Replace the holder before recalibrating.
Planned maintenance
Inspect the holder at nozzle changes and replace it when it is chipped, cracked or discoloured.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Laser Consumables | USD 112.81 | 5 Oct 2026 |
| Quality Laser Supply | USD 170.00 | 6 Oct 2026 |
| American Photonics | USD 287.80 | 6 Oct 2026 |
| Spare Part Mart | USD 90.25 | Today |
Our price of USD 90.25 is 20% to 69% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Check for 936678 or 913966 on the old holder or in your parts list. It has an M6 nozzle thread and is 17.5 mm across and 17.7 mm high.
No. It is an aftermarket holder made to the same dimensions and thread. The Trumpf part numbers are shown so you can match the holder on your machine.
It is the same holder in each. The 10 pack has the lowest price per holder, which suits shops that keep spares for collisions.
Yes. Shipping options and costs for your country are shown at checkout.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
