Volvo 14635718 is the engine ECU harness in black corrugated conduit with two large ECU connectors and branch plugs. It is used on Volvo EC220D excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
The same part is also sold as Volvo VOE14635718.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Engine ECU Wiring Harness |
| Replaces |
Volvo 14635718 |
| Machine |
Volvo EC220D excavator |
| Position |
Engine ECU |
| Cross references |
Volvo VOE14635718 |
| Fits |
Volvo EC220D excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
854430 |
| Country of Manufacture |
China |
Compatibility
Volvo machines
Volvo EC220D excavators
Check the part number on your old unit before ordering.
Part numbers
| Volvo Part No.(SPM Part No.)
|
Fits |
|
14635718(SPM-HEP-5054)
|
Volvo EC220D excavators |
|
VOE14635718(SPM-HEP-5054)
|
Volvo EC220D excavators |
Applications & use cases
Intermittent faults and warning codes
Chafed, crushed or corroded wires in an engine or main harness give faults that come and go: sensor codes, a rough running engine or a machine that will not start. When several sensors fault at once, look at the harness.
Heat and rodent damage
Harnesses next to the exhaust and turbo go brittle and crack, and rodents chew the insulation on machines that stand. A new harness is quicker than repairing many wires.
Burnt or corroded plugs
Green corrosion or melted pins in the plugs cause high resistance and false readings. Replacing the harness renews every plug at once.
Fitting tips
Disconnect the batteries first, photograph or label every plug before removing the old harness, route the new one along the same clips and away from hot and moving parts, then clear the fault codes and test.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| SINOCMP |
USD 249.00 |
2 Nov 2026 |
| eBay, aftermarket seller |
USD 537.46 |
2 Nov 2026 |
| Spare Part Mart |
USD 199.20 |
Today |
Our price of USD 199.20 is 20% to 63% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Volvo EC220D excavators?
Yes, it was made for the Volvo EC220D excavators. Check the old wiring harness is marked 14635718 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the wiring harness on my Volvo EC220D excavators?
On the Volvo EC220D excavators, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the wiring harness needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Does the voltage matter?
Yes. Many machines have 12 V and 24 V versions of the same wiring harness. Check the old part or the machine plate before fitting.
Should I grease the connector?
A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.
Is this a genuine Volvo 14635718?
No. It is an aftermarket wiring harness made to replace the Volvo 14635718. It is not made by the original manufacturer; the number only shows what it replaces.