Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Volvo VOE15107105 Aftermarket Injector Wiring Harness
Volvo VOE15107105 Aftermarket Injector Wiring Harness
Volvo VOE15107105 Aftermarket Injector Wiring Harness

Volvo VOE15107105 Aftermarket Injector Wiring Harness

$455.20 USD
  • SKU: SPM-HEP-5051-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 4.0 kg (8.82 lb)
Members earn 455 points on this order. Join today to earn 200 points off your first order.

Volvo VOE15107105 is the injector wiring harness on a black moulded rail carrier with leads in black conduit and sealed two pin plugs to each injector. It is used on Volvo EC330B and EC360B excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.

The same part is also sold as Volvo 15107105.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Injector Wiring Harness
Replaces Volvo 15107105
Machine Volvo EC330B, EC360B, EC360CL excavators
Cross references Volvo VOE15107105
Fits Volvo EC330B, EC360B and EC360CL excavators
Condition New, aftermarket
Stat. HS-Code 854430
Country of Manufacture China
Compatibility

Volvo machines

Volvo EC330B, EC360B and EC360CL excavators

Check the part number on your old unit before ordering.

Part numbers
Volvo Part No.(SPM Part No.) Fits
15107105(SPM-HEP-5051) Volvo EC330B, EC360B and EC360CL excavators
VOE15107105(SPM-HEP-5051) Volvo EC330B, EC360B and EC360CL excavators

Applications & use cases

Intermittent faults and warning codes
Chafed, crushed or corroded wires in an engine or main harness give faults that come and go: sensor codes, a rough running engine or a machine that will not start. When several sensors fault at once, look at the harness.

Heat and rodent damage
Harnesses next to the exhaust and turbo go brittle and crack, and rodents chew the insulation on machines that stand. A new harness is quicker than repairing many wires.

Burnt or corroded plugs
Green corrosion or melted pins in the plugs cause high resistance and false readings. Replacing the harness renews every plug at once.

Fitting tips
Disconnect the batteries first, photograph or label every plug before removing the old harness, route the new one along the same clips and away from hot and moving parts, then clear the fault codes and test.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
SINOCMP USD 569.00 2 Nov 2026
Kudu Parts USD 750.00 2 Nov 2026
eBay, aftermarket seller USD 875.61 2 Nov 2026
Fab Heavy Parts USD 1,611.80 2 Nov 2026
Spare Part Mart USD 455.20 Today

Our price of USD 455.20 is 20% to 72% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Volvo EC330B?

Yes, it was made for the Volvo EC330B, and 2 more listed under compatible equipment. Check the old wiring harness is marked VOE15107105 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the wiring harness on my Volvo EC330B?

On the Volvo EC330B, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.

What are the signs the wiring harness needs replacing?

A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.

Does the voltage matter?

Yes. Many machines have 12 V and 24 V versions of the same wiring harness. Check the old part or the machine plate before fitting.

Should I grease the connector?

A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.

Is this a genuine Volvo VOE15107105?

No. It is an aftermarket wiring harness made to replace the Volvo VOE15107105. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

Related products

BACK TO TOP
Chat directly with MikeThe founder